Replacing the light bulb
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO REPLACE THE LIGHT
BULB.
o There is an interior light next to the thermostat dial.
o Use a screwdriver to undo the screw in the light bulb cover, then
gently slide off the light bulb cover.
o Change the present light bulb with a new one. The replacement
bulb should not have a greater rating than 15 W.
o Replace the light bulb cover and retighten the screw that holds
the light cover in place. After waiting five minutes, reconnect
your plug to your mains supply.
19