BAUMATIC BFD47SS dishwasher user manual
PROBLEM
Black or grey
marks on dishes!
Water standing in
the bottom of the
tub!
Dishwasher leaks!
Door popping
open!
Wrong Reading of
Cycle Time
remaining!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
POSSIBLE CAUSES
Aluminium utensils
•
have rubbed against
dishes
This is normal
•
Overfilled dispenser or
•
rinse aid has spilled
Dishwasher isn't level
•
3-in-1 Tablets
•
Appliance not level
•
Note, the control panel
•
displays both the
water temperature and
the time remaining as
the dishwasher runs a
cycle
WARNING!
21
WHAT TO DO
Use a mild abrasive cleaner to
•
eliminate those marks by hand.
A small amount of clean water
•
around the outlet on the tub bottom
at the back of the tub keeps the
water seal lubricated. No action
needed.
Be careful not to overfill the rinse
•
aid dispenser.
Spilled rinse aid could cause
•
oversudsing and lead to
overflowing.
Wipe away any spills with a damp
•
cloth.
Make sure the dishwasher is level.
•
Make sure if you're using 3-in-1
•
tablets that you do not put rinse aid
and salt into the appliance as well.
Level appliance & ensure top screws
•
attaching appliance to work surface
are not lifting the weight of the
dishwasher.
Understand what your appliance's
•
control panel is displaying. Do not
confuse the water temperature
with the number of minutes
remaining in a wash cycle.
21