Digital Optical Connections Cd Recorder; Power Supply; Setup Recommendations; Inserting Batteries In The Remote Control - Philips CDR765 Manual

Digital Optical Connection CD Recorder
This connection is only required if you want to record from an
external CD player with a digital optical output.
1 Remove the dust caps from the digital optical connections.
(We recommend that you save the caps).
2 For recording from an external source, use a fiber-optic
cable 5 to connect the digital optical input on the CD
Recorder/Player and the digital optical output on an
external CD player.
Note: For playing back, the digital coaxial outputs or analogue
outputs on the CD Player and the CD Recorder must be
connected to an amplifier.
L
R
AN AL
OG
OU T
L
R
L
OU T
AN AL OU T
OG R
DI GI TA
L
1
L
L
R
CD
R
IN
OU T
IN
T A P E
When connecting the Digital
Optical cable, make sure it is
fully inserted until there is
a click.

Setup recommendations

- Place the CD Recorder/Player on a solid, vibration free
surface.
- Do not place the CD Recorder/Player near a source of heat
or in direct sunlight.
- Do not use the CD Recorder/Player under extremely damp
conditions.
- If the CD Recorder/Player is placed in a cabinet, make sure
that a one-inch space remains free on all sides of the
recorder for proper ventilation.
C D P L A
Y E R
D IG IT
A L
O U T
OU T
OP TI CA
L
4
5
C D R E C
O R D E R
L
R
IN
OU T
AN AL
OG
IN
OU T
DI GI TA
L
IN
OP TI CA
L
2
R E C E I V
L
E R
R

Power supply

1 Plug the power cord supplied into the MAINS connector on
the CD Recorder/Player, then into a wall socket.
2 Press ON/OFF to turn the CD Recorder/Player on.
Note:
- The CD Recorder/Player will automatically adjust to the
local mains voltage.
- When the CD Recorder/Player is in the 'OFF' position, it is
still consuming some power. If you wish to disconnect your
CD Recorder/Player completely from the mains, withdraw
the plug from the AC Outlet.

Inserting batteries in the remote control

1 Open the battery compartment cover.
2 Insert 2 batteries (AAA, R03 or UM-4; as supplied) as
shown.
3 Replace the cover.
Note: We recommend using 2 batteries of the same type and
condition.
Batteries contain chemical substances; dispose of
them properly.
INSTALLATION
11