VorOtek L SCOPE Technical Manual

L
SCOPE
Technical Manual

Cleaning

• Unplug the VorOtek Scope or Light from power source
prior to cleaning.
• Visually inspect the VorOtek Scope or Light for soiling.
• Remove all visible soiling by first wiping external
surfaces & cables with a soft cloth slightly dampened
with mild detergent and water (mixed to the
manufacturer's instructions).
• Wipe all external surfaces*, including Headband
model leather covers & velcro straps using a soft cloth
slightly dampened with 70% isopropyl Alcohol (IPA).
*SpecFrame model cables should be wiped with a
hospital approved disinfectant wipe.
• Allow all surfaces to air dry for at least 60 seconds.
• Re-wipe all surfaces with a lint free soft cloth to
remove any residue from cleaning products.
• Ensure all surfaces & cables are dry before operating
the VorOtek Scope or Light.
• Caution: Do not immerse or saturate any component
of the VorOtek Scope or Light in a cleaning solution.
• Caution: Do not autoclave any component of the
VorOtek Scope or Light.
23 Point Henry Road
MOOLAP VIC 3224, Australia
T +61 3 5248 5809
E office@VorOtek.com.au
www.VorOtek.com

Maintenance

• Before every procedure, carefully inspect the
VorOtek Scope or Light to ensure it is fully functional.
DO NOT use if inspection reveals any damage.
• The VorOtek Scope & Light Range does not require
any other routine maintenance.
• For repair or warranty, refer to the support & repair
page on VorOtek's website.

Warranty

• Scopes & Lights - 3 years for any component defect
or manufacturing failure.
• Power Pack - 18 months for any component defect or
manufacturing failure.
• Warranty does not cover abuse, misuse or transit
damage.
• Please contact VorOtek prior to sending for repair.
Notices & Precautions
• Should a serious incident occur while using the device
please report the incident to the manufacturer
(VorOtek) and the competent authority of the
Member State in which the user and /or patient is
established.
• Only to be used by qualified health professionals.
• Do not use in the presence of flammable
anaesthetics.
• Do not expose electrical equipment to liquids or
excessive moisture.
IFU-004-L Scope TechMan-R4
L
SCOPE
Technical Manual