ANKE 160 Assembly Instructions

Assembly Instructions
Countersunk head Spax screw 6 x 80
Washer M 8
M 8
hexagonal nut
Cross beam
Tension screw
Your ANKE carpenters bench has been made using carefully selected top-quality red beech from the
Swabian Alb area of Germany. Particular attention is paid to ensuring that the timber is correctly, gently
and evenly cured in order to eliminate shrinkage, warping or distortion of our carpenters benches.
Please ensure when setting up your carpenters bench that you work in a perfectly dry storage room or
workshop at normal temperatures. Unheated cellar rooms, provisional storage areas or workshops in new
buildings which are still damp are unsuitable environments for carpenters benches.
ANKE regrets that It is unable to accept liability for complaints and any consequential damage
caused as a result of incorrect treatment.
All the components of your carpenters bench were manufactured on a computer-controlled machining.
Use of this unique production technique, during which all individual components are precisely processed
and assembled in a single clamping operation, allows us to guarantee the most stringent quality
specifications. To protect it against outside influences, your ANKE carpenters bench is impregnated with
a special hot wax and subjected to| exhaustive quality controls.
max.weight load Board 800 kg · Make sure the base is level and solid.
Thank you from the ANKE-Team