A default polar table is stored in the Processor Regatta. It needs to be updated for your
boat.
WARNING
Always save the modifications by pressing « Save File ». Once the file has been saved,
you must reboot the Processor Regatta for the changes to be taken in account. This is
done by pressing « Reboot » accessible from the « Action » section.
9.1 Reading a polar table
The table below is an example of a polar table in the Processor Regatta. The index on
the top line shows the true wind speed in knots. The column on left shows the true wind
angles in degrees. Boat speeds are in knots.
34
47_processor_Regatta_um_UK_40