Cleaning And Storage - JOCCA 2232 Instruction Manual

4-EN
-Children should be supervised to ensure they do not play with
the device.
-If you need to put down the appliance while using it, please
place on a stable, horizontal and flat surface.
-If your appliance has been dropped or fallen into water or any
other liquid do not use it or try to repair it. Contact the customer
service department.
- Do not inmerse the appliance or any part of it in water or any
other liquid.
-If the power supply cable or the plug are damaged, do not use
the appliance or try to replace the cable yourself. Contact the
customer service where they will replace it correctly for you.
-Do not pull the cable to unplug the appliance from the mains,
always pull from the plug.
-Do not move the appliance during use.
-For your safety and for the appliance to work correctly, always
use JOCCA spare parts and accessories.
-Use the appliance on a smooth, horizontal, stable and level
surface.
-Leave sufficient space above and to the sides of the unit for
proper air circulation.
-Please do not wind the cable around the appliance.
-Do not leave product unattended.
-Please unplug the appliance from the mains electricity supply
when not in use, before cleaning, and if it is not working.
-Unplug the appliance from the mains whenever you have
finished its use, before cleaning, when changing accessories, or
if you are going to leave it unattended.
-Unwind the power cord completely to prevent overheating.
-This device will only be totally disconnected when it is unplugged
from the mains.
-Do not use the appliance with wet hands or bare feet.
-Do not cover the air vent with the appliance in operation.
-Never touch the moving parts of the appliance. Never put your
fingers or any other object in the air inlet or outlet. Never insert
any object that might block or break the appliance.
INSTRUCTIONS FOR USE
CAUTION: CAUTION: Before the assembly or disassembly, make
sure that the appliance is not plugged into the mains.
-Put front base and back base together and tighten srew E. Please
check picture 1 and 2
-Ensure that power supply cable F is in the depression provided
for it. Please check picture 3.
-Ensure that the start button is in the OFF position before plugging
in the same to the mains electricity supply.
-Plug in the appliance to the mains electricity supply.
-Select the desired airflow speed. Three positions can be
selected:
"1" – low airflow.
"2" – medium airflow.
"3" – maximum airflow.
-The oscillation function makes it possible to direct the flow from
the apparatus so that it automatically alternates over a range of
90º . The appliance already comes with this function automatic
selected.

CLEANING AND STORAGE

-Make sure that the appliance is disconnected from the power
supply before cleaning.
-Do not use abrasive detergents or products that could damage
the appliance. Simply clean the surface with a wet cloth.
-Do not inmerse the appliance in water or any other liquid.
-NEVER INMERSE THE BODY MOTOR IN WATER OR OTHER
LIQUID, OR PUT IT UNDER THE TAP .
-Clean all the accessories under running water, rinsing them in
soapy water or in the dishwasher.
-Store the appliance in a safe place.
EN-5