Setup; Battery Pull Tab; Connecting Power - Reka WIRELESS CHARGING ALARM CLOCK User Manual

Setup

Setup
Check the Wireless Charging Alarm Clock before it's first use to ensure you get the
best experience of the product out of the box.

Battery Pull Tab

This product comes with a pre-installed CR2032 battery for the internal memory. To
engage the battery, turn the radio upside down and pull the plastic tab
the battery bay.
C

Connecting Power

This product is designed to be used with mains power. Connect the mains plug
supplied with this product to a suitable mains outlet and the connector end to the
5V/2A DC in port
automatically turn on and will show the factory default LCD screen.
If you have previously setup the date and time the date and time will be
automatically set from the internal memory.
10.
A 11
on the back. Once supplied with power, the product will
C 1 from
1