FUXTEC FX-E1B4AH Original Manual
FUXTEC FX-E1B4AH Original Manual

FUXTEC FX-E1B4AH Original Manual

20v 4ah battery

Advertisement

Quick Links

Original manual for FUXTEC 20V 4Ah battery

Intended Use

This battery is exclusively intended for the FUXTEC 20 Volt series. The device is not intended
for commercial use. Any other use or modification of the device is not considered to be as
intended and involves considerable risk of accidents. The manufacturer accepts no liability
for damage resulting from improper use.

Use and handling of the battery tool

Only charge the batteries in chargers recommended by the manufacturer.
For a charger that is suitable for a particular type of battery poses a risk of fire when used
with other batteries.
Only use the rechargeable batteries provided for this purpose in battery tools. The use
from other batteries may cause injury and fire.
Keep the unused battery away from paper clips, coins, keys and nails, screws or other small
metal objects that can bridge the contacts of the could cause. A short circuit between the
battery contacts can cause burns or fire
The liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of
accidental contact, rinse with water. If the liquid enters the eyes, you will need to seek
additional medical attention. Leaking battery fluid can cause skin irritation or burns.
Do not use a damaged or modified battery. Damaged or modified batteries may behave
unpredictably and cause fire, explosion or injury.
Do not expose a battery to fire or excessive temperatures. Fire or temperatures above
130°C/ 265°F may cause an explosion.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX-E1B4AH and is the answer not in the manual?

Questions and answers

Summary of Contents for FUXTEC FX-E1B4AH

  • Page 1 Original manual for FUXTEC 20V 4Ah battery Intended Use This battery is exclusively intended for the FUXTEC 20 Volt series. The device is not intended for commercial use. Any other use or modification of the device is not considered to be as intended and involves considerable risk of accidents.
  • Page 2 Follow all charging instructions and never charge the battery or battery tool outside the temperature range specified in the operating instructions. Incorrect charging or charging outside the approved temperature range can destroy the battery and increase the risk of fire. Charging the battery - The battery must be charged before first use.
  • Page 3 Technical Data Battery Type Li-Ion Rated voltage maximum minimum Capacity 4,000mAh Loading time 30min with 2.4A fast charger Accessories You can purchase the following accessories at www.fuxtec.de. Accessories Battery pack 2Ah 1A Charger 2.4A fast charger 2*2.4A Double charger...

This manual is also suitable for:

Fx-e1b2ah

Table of Contents