Flying Industry Development 0020703 Quick Manual

RF Wireless Remote Control Radio Controller / Transmitter & Receiver (Model 0020703)
Package Include:
1 x Receiver: S4U-AC380
1 x Transmitter: CV-4-3
1 x User manual
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks,
motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
AC380V Power Supply.
Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminals are NO / NC (normally open /
normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S4U-AC380
Power Supply (Operating Voltage): AC380V
Output: Relay output (Normally open and normally closed)
Working Frequency: 315MHz / 433MHz
Channel: 4 CH
Control Modes: Momentary, Latched
Static Current: ≤6mA
Maximum Working Current: 7 A / each channel
Case size: 96mm x 58mm x 37mm
Transmitter Parameters:
Model No.: CV-4-3
Shell Color: White
Channel/Button: 4
Button Symbol: Two▲, Two▼,
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 15mA
Operating Frequency: 315Mhz / 433MHz
Encoding Chip: PT2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 500m / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 110mm x 50mm x 18mm
Matching Transmitters:
The receiver can work with different transmitters, such as model C-4 (100M), CWB-4 (50M, waterproof),CV-4-3 (500M), CP-4 (500M), CB-4 (1000M)
etc.
Working Range:
With a transmitter (such as CV-4-3) to form a complete set, the maximum working distance can reach 500M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as
CB series transmitters.
Usage (with the transmitter CV-4-3):
Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals NO and COM are Normally Open;
Terminals NC and COM are Normally Closed.
The receiver can be used to control AC 380V pumps, motors and other equipments.
Notice: The receiver can control AC 380V equipment by the contactor, but it can't directly connected to the 380V equipment.
Wiring:
If you want to control two AC 380V motors, you can connect the receiver, the 380V contactor, the 380V motors and the 380V power according
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com