Use; Adjusting Bath Seat; Positioning The Bath Seat - Dietz 9403-B Instructions For Use Manual

5.

Use

5.1 Adjusting the bath seat
The bath seat has to be adjusted to the bath tub width. The adjustments on the underside of the
seat are for this purpose.
Symbol photo, subject to technical alterations
 Unscrew the 4 Allen Key bolts with an Allen key SW 4.
 Place the bath seat in the bath and pull out the two sides of the resting frame so that the
resting rubbers are positioned completely on the bath edge.
 Make sure that both sides are pulled out equally.
 Now remove the bath seat from the bath and screw the 4 screws tight.
5.2

Positioning the bath seat

The bath seat can be used in every conventional bath tub with normal dimensions. The
resting brackets have a non-slip cover (1). This prevents slipping of the unit on the bath
edge.
Place the bath seat in the bath so that the resting brackets are completely positioned on the bath
edge.
Rev.150220
Bath seat 9403A/B
8