Abra SMART BT Quick Reference Manual

BLOOD GLUCOSE MONITORING SYSTEM
QUICK REFERENCE GUIDE
This quick instruction for use will help you to set up and prepare your glucose meter for
performing a test. For detailed information, see the Instructions for use included to the set
ABRA SMART BT.

1. GLUCOSE METER DESCRIPTION

Display
Button
Button
Test Strip
Ejector
Button
Button
Backlight
Test Strip Port

2. STARTING THE DEVICE

1 2
Slide forward battery Place the batteries, remember
about the correct polarity + -.
cover.
1
When the unit is turned o hold
Data Port
Press
3
Battery Cover
Label
Use
month. Press
Test Strip
Ejector
Button
1
3
Twist and remove the cap
from the lancing device.
4
Slide battery cover back.
Put and tighten the cap back
onto the lancing device.

3. SETTING THE DATE AND TIME

for 4 sec.
or , to select the time format. Press
, to con rm the settings.
and buttons to set the date and
to con rm the settings.

4. PREPARING THE LANCING DEVICE

2
B A
Insert the lancet into the lancet
holder.
5
A B
Set the puncture depth by
turning the end of the cap.
2
Use and , buttons to set the year.
Press , to con rm the settings.
4
Use and to set the hour and minutes.
Press to con rm the settings.
3
Twist and remove the lancet
cap.
6
1 2 3 4 5 6
Pull back the movable part
until you hear a click.