Burlingham Junior Classic Arena Setup Instructions

Please take a moment to read through the entire directions before setting up your Burlingham
Sports Arena. These instructions will guide you step-by-step through the process of assembly.
If you should have any difficulty or question please call us at 800-446-0134
Included In Your Shipment:
56 Rails
50 Line Posts
4 Corner Posts
2 End Posts
54 Post Caps
2 Ball Caps for End Posts
56 Post Stakes
21 sections on 40 meter side
7 sections on 20 meter side
Preparation:
1. Drag or blade the arena surface – level and smooth as possible.
2. Locate and count all parts – Separate line posts, corner posts, and end posts.
3. Deposit rails and posts – Place the pieces around the outside perimeter where the arena
will stand. This is to get the pieces close to where they will be installed.
Set-up Instructions for 20x60 meter
Junior Classic Arena
Rail, Line Post,
And Post Cap
What You Need:
Hammer
40 Meter Tape Measurer
120 Meters of Twine or String
Phillips-Head Screwdriver
Corner
Post
End
Post