Summary of Contents for Antari SCN 600
- Page 1 User Manual - English - © 2021 Antari Lighting and Effects Ltd ©2021 Antari Lighting and Effects www.Antari.com...
- Page 2 INTRODUCTION Thank you for selecting the SCN-600 Scent Generator by Antari. This machine has been designed to perform reliably and efficiently for years when the guidelines in this manual are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit.
- Page 3 The machine is not waterproof. If the machine gets wet, stop using it and immediately unplug § main power. § No user serviceable parts inside. If service is in need, contact your Antari Dealer or a qualified service technician. Operational Concerns § Never point or aim this machine towards any person.
- Page 4 Step 1: Place the SCN-600 on a suitable flat surface. Be sure to allow at least 50cm of space around the unit for proper ventilation. Step 2: Fill the fluid tank with an approved Antari Scent Additive. Step 3: Connect the unit to an appropriately rated power supply. To determine the correct power requirement for the unit, please refer to the power label printed on the back of the unit.
- Page 5 Once the desired DMX address is set and a DMX signal is received, the unit will react to the DMX commands sent from a DMX controller. ©2021 Antari Lighting and Effects www.Antari.com...
- Page 6 6-255 Scent On RECOMMEDNED SCENT The SCN-600 can be used with a variety of scents. Please be sure to only approved Antari scents. Some scents on the market may not be compatible with the SCN-600. ©2021 Antari Lighting and Effects...
- Page 7 Any non Antari Lighting and effects Ltd. brands and product names are trademarks or registered trademarks of their respective companies. Antari Lighting and Effects Ltd. and all affiliated companies hereby disclaim any and all liabilities for personal, private, and public property, equipment, building, and electrical damages, injuries to any...
- Page 8 C08SCN601 ©2021 Antari Lighting and Effects www.Antari.com...
Need help?
Do you have a question about the SCN 600 and is the answer not in the manual?
Questions and answers