Download Print this page

Zamel Cet LediX ZNN-15-14 Manual

Surface mounting power supply

Advertisement

Quick Links

Surface mounting
power supply
14 V DC / 15 W
ZNN-15-14
IP protection level: protection against dust and strong jets
of water - it is required to carry out an IP connection with
a degree not less than IP56
Outdoor
Surface
mounting
mounting
ZNN-15-14 power supply is a professional impulse power supply with
14 V DC voltage stabilizer. It is designed for surface mounting. The nomi-
nal power output is 15 W. The power supply is recommended to supply
the devices belonging to the LEDIX group. The product has a short-circuit
and overload protections, which increase the safety of its use. Its high ef-
ficiency and a very low power consumption in the standby mode, makes it
a very economical solution, designed for continuous operation. The power
supply meets the requirements of the harmonized standards.
Characteristic features:
• 14 V DC nominal output voltage, 15 W nominal power,
• low power consumption in the standby mode (0,25 W),
• efficiency at the level of 79%,
• high stability of the output voltage with input voltage or load changes,
• protections: short-circuit, overload,
• wide ambient temperature range: -10 ÷ +50
• long-term operation reliability,
• output connecting cables 150 mm long.
The power supply cooperates with:
• LEDIX series LED diode fittings supplied with 14 V DC
• LED controllers and radio receivers supplied with 10÷14 V DC.
CAUTION: The total power of lighting fittings or of the devices cooper-
ating with the power supply must not exceed 15 W.
tel: +48 32 449 15 00, fax: +48 32 449 15 02
e-mail: ledix@ledix.pl, www.ledix.pl
230 V AC / 15 W IP56
weight: 143 g
PN-EN 61204-3; PN-EN 55022; PN-EN 61000
LED diode power supply for surface mounting
The symbol means
selective collecting of
electrical and electronic
equipment.
It is forbidden to put the
used equipment together
with other waste.
Declaration of Conformity is on www.ledix.pl
SCAN
the technical
data
Output
voltage
14 V DC
C,
o
Cet Lighting Sp. z o.o.
PL 43-200 Pszczyna
ul. Zielona 27, Poland
14 V DC 15 W
TYPE: ZNN-15-14
ZNN-15-14 ENG Ver. 01
230 V AC
Surface
mounting
power supply
14 V DC
15 W
ZNN-15-14

Advertisement

loading

Summary of Contents for Zamel Cet LediX ZNN-15-14

  • Page 1 SCAN 230 V AC Surface mounting power supply 14 V DC / 15 W the technical data ZNN-15-14 Surface mounting power supply IP protection level: protection against dust and strong jets of water - it is required to carry out an IP connection with a degree not less than IP56 14 V DC Output...
  • Page 2 DESCRIPTION DIMENSIONS ZNN-15-14 power supply for surface mounting is a professional impulse power supply with 14 V DC voltage stabilizer. It is designed for surface mounting. The nominal power output is 15 W. The power supply is rec- ommended to supply the devices belonging to the LEDIX group. The product has a short-circuit and overload protections, which increase the safety of its use.