Advertisement
Quick Links
Advertisement
Summary of Contents for Lekolar 81214
- Page 1 TUBULAR MOTOR...
- Page 2 Thank you for choosing our screens. All screens have passed the strict quality inspection before delivery. Read this manual carefully to ensure proper usage. You may also find the solution if you have problems. Important Attention the installation of the screen, the electric connections, the setting of the limit switches, must be made from trained engineer only.
- Page 3 00-02 00-03 00-01 00-05 00-04 01-01 00-07 00-06 01-02 00-09 00-08 01-03 01-04 00-11 00-10 00-01 LEFT END CAP 00-12 00-02 MOTOR HOLDER 01-01 TOGGLE SWITCH 00-03 TUBULAR MOTOR 01-02 UPPER COVER OF SWITCH BOX 00-04 ROTOR WHEEL 01-03 FUSE 00-05 SCREEN HOUSING 01-04...
- Page 4 OPERATING INSTRUCTION Unpack the screen carefully, be sure the screen is in good condition, check all the accessories are packed inside the carton. Check the voltage and frequency marked on the screen is in accordance with the local power supply. It is suggested only to use the screens indoor under normal temperature and humidity.
-
Page 5: Troubleshoot
TROUBLE SHOOT Always call qualified engineer for maintenance to avoid dangers. Always unplug the power supply first before disassemble the screen. Check power whether or not is provided. Check the fuse whether or not is broken. Check wire connection If your motorized screen is with switch control, please refer the fig below for electric connection. - Page 6 TERMINAL BLOCK SCREEN REMOTE CONTROLLER 120V AC/60Hz TUBULAR MOTOR PLUG BLACK WHITE WHITE YELLOW WHITE BLACK BLACK DOWN YELLOW If remote control does not work well, please check the battery and replace new one. The limit time of tubular motor is 5 minutes without stop.It will turn on the overhead switch after long time using(until it becomes cool completely) Upper and lower limit switch is in the right end of the screen...
- Page 7 Press down the set up key 1 of the remote control box (or the inner key 8 of the hand set) one time, you will hear the sound "du-du--". Then the remote control box is in set up model. When the remote control box is in set up model, press the key 2 of the remote control box, after hearing the "du-du--", press any key of the invalid hand set, after hearing "du---- "...
-
Page 8: Technical Data
TECHNICAL DATA Matte White Screen Gain: 0.9 Viewing Angle: >160 High color rendering, high resolution. Glass Beaded Screen Gain: 2.2 Viewing Angle: >30 High color rendering, high resolution. Gain Measurement: refer the fig below Standard: JB/T8389 issued by Ministry of Machinery Industry SCREEN Height Direction... -
Page 9: Screen Fabric
SCREEN FABRIC Black PVC Black PVC Base Base White PVC White PVC Glass beaded MATTE WHITE SCREEN SURFACE GLASS BEADED SCREEN SURFACE...
Need help?
Do you have a question about the 81214 and is the answer not in the manual?
Questions and answers