Downloadable Content - LeapFrog On-the-Go Story Pal Instruction Manual

Downloadable Content

Download additional free stories, songs and poems using your
computer and add them to your On-the-Go Story Pal™ device.
1. Power Up and Connect
Locate the On/Off/Mode Selector Dial on the back of your
On-the-Go Story Pal™ device and rotate it to the Stories
category. Then, connect the device to your computer using
a micro USB cable (micro USB cable not included).
2. Set Up
Install the LeapFrog
Story Pal™ onto your PC or Mac computer
from leapfrog.com/connect
3. Download
Follow the on-screen instructions to download and install
additional content.
4. Play and Learn!
Eject the On-the-Go Story Pal™ device and your child is ready
to play!
Warning: Do not power off the device or disconnect the
micro USB cable while the device is being updated.
System Requirements for Computer Connection
High-speed Internet connection; parent account registration;
monitor resolution of 1024 x 768; available USB port; 1 GB of
RAM; 500 MB free disk space.
PC Requirements: Pentium
or faster recommended); 64-bit version of Windows
Windows 10 operating system with latest service pack.
®
Mac Computer Requirements: Apple computer (1 GHz processor or
faster recommended); Mac OS X 10.13+ operating system software.
WINDOWS is a trademark of Microsoft Corp., registered in the
U.S. and other countries. PENTIUM and INTEL are trademarks of
Intel Corp., registered in the U.S. and other countries. Macintosh
and Mac logos are trademarks of Apple Inc. in the United States
and other countries. All other trademarks are the property of
their respective owners.
Connect application for the On-the-Go
®
4 or equivalent (2 GHz processor
®
8 or
®
12