Hammer Drill - AEG BSB18BL Original Instructions Manual

TECHNICAL DATA
Rated voltage
Drilling capacity in steel
Drilling capacity in wood
Drilling capacity in brick and tile
Wood screws (without pre-drilling)
No-load speed 1st gear
No-load speed 2nd gear
Rate of percussion under load 1st gear
Rate of percussion under load 2nd gear
Max torque with battery (4.0 Ah)
Max torque with battery (6.0 Ah)
Drill chuck range
Weight - not including battery pack
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
Use AEG 18V battery and charger only
WARNING!
Read all safety warnings and all instructions. Failure to follow
or serious injury.
Save all warnings and instructions for future reference.
HAMMER DRILL SAFETY WARNINGS
Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control
can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a „live" wire
may make exposed metal parts of the power tool „live" and could
give the operator an electric shock.
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electric shock.
Sawdust and splinters must not be removed while the machine is
running.
cables and gas or water pipes.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors offer to retrieve old batteries to
18

HAMMER DRILL

Compatible charger
(not included)
AL1218G
BL1218
BLK1218
BL18DP-X5
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System GBS chargers for charging System GBS battery
packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
to a short circuit, never immerse your tool, battery pack or charger
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The electronic battery percussion drill/screwdriver may be used for
drilling, percussion drilling, as well as screwdriving for independent
use away from mains supply.
Do not use this product in any other way as stated for normal use.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for
18
BSB18BL
18 V
13mm
100 mm (hole saw bit)
20 mm
15 mm
0 - 550 min -1
0 - 2000 min
-1
8800 min -1
32000 min
-1
100 Nm
140 Nm
1.5-13 mm
1.6 kg