Page 1
01865 767676 sales@unicol.com www.unicol.com AVHT / AVHP / AVLT / AVLP / AVHB / AVHW Screen Size: 33 - 70” Guide Max. Weight: 60-70kg Revised 15/12/20 *Please check model specific details before installing* WARNING Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and do not continue the installation until it has been reviewed.
01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver 17mm Spanner 5mm Allen Key 3/16th Allen Key COMPONENTS DESCRIPTION 1500mm (High) or 950mm (Low) Columns AVP1 500x400mm Shelf Twin Column Mount Adapter 7.5cm Castors (2 standard, 2 braked)
Page 3
01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Turn the base upside down and push each castor Place the 2 columns with holes, located approx until it clicks into place. Please ensure that the 75mm from the bottom, over the castors with brakes are located at the front.
Page 4
01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Once placed over columns and at the desired Line the back plate up with the mount adapter, height, tighten the two grub screws to secure into as shown above. Fix 4 screws from behind the place.
Page 5
01865 767676 sales@unicol.com www.unicol.com STEP 9 STEP 10 Gently lower the screen until the arms are securely Identify the front mast in-fill panels (the 4 with cut- hanging on top of the back plate. Once centered, outs go to the rear). Start with the panel that has adjust the level of the screen with the two top the 4-way power socket attached clip into place.
Page 6
01865 767676 sales@unicol.com www.unicol.com BOLT DOWN STEP 2a STEP 1a Position floor plate and mark through the screw Loosen the grub screws on the jaws of the column holes (arrows above) where it will be positioned. grips so that you can slide the columns over.