Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
AVHT / AVHP / AVLT / AVLP / AVHB / AVHW
Screen Size: 33 - 70"
Guide Max. Weight: 60-70kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol AVHT
Summary of Contents for Unicol AVHT
- Page 1 01865 767676 sales@unicol.com www.unicol.com AVHT / AVHP / AVLT / AVLP / AVHB / AVHW Screen Size: 33 - 70” Guide Max. Weight: 60-70kg Revised 15/12/20 *Please check model specific details before installing* WARNING Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and do not continue the installation until it has been reviewed.
-
Page 2: Tools Required
01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver 17mm Spanner 5mm Allen Key 3/16th Allen Key COMPONENTS DESCRIPTION 1500mm (High) or 950mm (Low) Columns AVP1 500x400mm Shelf Twin Column Mount Adapter 7.5cm Castors (2 standard, 2 braked) - Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Turn the base upside down and push each castor Place the 2 columns with holes, located approx until it clicks into place. Please ensure that the 75mm from the bottom, over the castors with brakes are located at the front.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Once placed over columns and at the desired Line the back plate up with the mount adapter, height, tighten the two grub screws to secure into as shown above. Fix 4 screws from behind the place.
- Page 5 01865 767676 sales@unicol.com www.unicol.com STEP 9 STEP 10 Gently lower the screen until the arms are securely Identify the front mast in-fill panels (the 4 with cut- hanging on top of the back plate. Once centered, outs go to the rear). Start with the panel that has adjust the level of the screen with the two top the 4-way power socket attached clip into place.
- Page 6 01865 767676 sales@unicol.com www.unicol.com BOLT DOWN STEP 2a STEP 1a Position floor plate and mark through the screw Loosen the grub screws on the jaws of the column holes (arrows above) where it will be positioned. grips so that you can slide the columns over.