Message
Appears when the
●
vehicle is moving.
Appears if you put the transmission into
●
vehicle is moving forward, or into
is reversing.
Appears when you set the power mode to ON without
●
fastening the driver's seat belt.
Appears when you change the shift position after
●
has been automatically selected with the driver's door
open, the driver's seat belt unfastened, then the brake
(White)
pedal is released.
Appears when you press the
●
engaged due to low ATF temperature.
Appears when you depress the accelerator pedal while
●
the transmission is in
Appears if there is a problem with the automatic
●
lighting control system.
uuIndicatorsuMulti-Information Display Warning and Information Messages
Condition
P button is pressed while the
(
R while the
(
(
D while the vehicle
(
P button but it is not
(
N .
Explanation
Make sure that the vehicle comes to a stop before
●
operating the shift button.
Fasten the seat belt properly before you start to drive.
●
2 Shift Operation P. 397
(
P
Depress the brake pedal until this message disappear.
●
Remove your foot off the accelerator pedal. When
●
driving, depress the brake pedal and operate the shift
position.
Appears while driving - Manually turn the lights on,
●
and have your vehicle checked by a dealer.
Continued
101