Related Manuals for Bafo BF-7351
Summary of Contents for Bafo BF-7351
- Page 1 USB 2.0 USB 2.0 External Card Reader External Card Reader User's Guide User's Guide (Multi-Slot) (Multi-Slot) INDEX Introduction Installation Guide Setup for Windows Setup for Mac OS Troubleshooting Specifications...
- Page 2 Features Introduction Features Thank you for purchasing USB 2.0 Card Reader. The USB 2.0 Card Reader is the most powerful and multi- functional device among all the other available readers, for it is able to access most of the storage cards and read/write 2 or 4 kinds of card at the same time.
- Page 3 Introduction Primary features of the USB 2.0 Card Reader include: USB 2.0/1.1 interface; access speed reaches 480 Mb/s. USB bus powered. AC power adapter is not required. Supports Hot-Swapping and Mass Storage Class Drive; no additional driver needed under Windows ME/XP and Linux (requires editing kernel code).
-
Page 4: Package Contents
Introduction Package Contents In the package of USB 2.0 Card Reader you will find following items. Please contact your local dealer if there are any shortages. USB 2.0 Card Reader Setup Disc USB Cable Package Contents... -
Page 5: System Requirements
Introduction System Requirements Hardware IBM PC compatible computer with USB 2.0/1.1 support Software Microsoft Windows 98/98SE/ME/2000/XP Linux(kernel code 2.4.0 or later versions) Hardware iMac series iBook series Power Mac G4 series Power Book with USB support Power Mac G3 with USB support Software Mac OS 8.6 or later versions iMac series require iMac Firmware 3.0 or later versions... - Page 6 Introduction Sockets 3-in-1 Reader 5-in-1 Reader 6-in-1 Reader * Certain types of 5-in-1 or 6-in-1 Reader are equipped with one CF/ATA socket and one 4-in-1 socket. The other 5-in-1 or 6-in-1 Reader are equipped with four socket. CF Socket Type I&II CompactFlash Card/ IBM Microdrive SM Socket 3.3V SmartMedia Card...
- Page 7 Indicators Introduction Indicators Two active LED indicators are used to display operation status of your USB 2.0 Card Reader. The Green LED lighting means the reader is connected to system and the power is on. The Red LED flashing means the reader is reading or writing data in inserted cards.
- Page 8 Installation Guide Installation Guide Installation Guide For Windows ME/XP Using the USB 2.0 Card Reader under Windows ME/XP requires no software setup. Installation Procedure (For Windows ME/XP) Start the Computer Hardware Setup Using USB Card Reader...
-
Page 9: Installation Procedure
Installation For Windows 98/98SE/2000 & Mac OS For all the other supported systems, software setup should be done, and then do the USB connection. Installation Procedure (For Windows 98/98SE/2000 & Mac OS) Software Setup Restart Your Computer Using USB Card Reader This procedure also applies to Windows ME/XP. -
Page 10: Software Setup
Setup for Windows Software Setup * You can skip this chapter if your OS is Windows ME/XP. Before connecting the USB 2.0 Card Reader into USB port, refer to following instructions to install the device driver. Insert Setup Disc into the CD-ROM drive. 2. -
Page 11: Hardware Setup
Setup for Windows Hardware Setup After completing device driver setup for your USB 2.0 Card Reader and restarting the system, refer to following instructions to install the USB 2.0 Card Reader. 1. Connect USB cable of your reader unit onto available USB port of your computer. -
Page 12: Using The Reader
Setup for Windows Using the Reader Please refer to following instructions to use the reader. 1. Insert your storage card. Open My Computer or File Explorer. 3. Double-click on the proper Removable Disk icon. 4. Access images and files on your storage cards just as the way you open, copy, move, or delete images and files on your hard disk drive. -
Page 13: Uninstall Software
Setup for Windows Uninstall Software Should you feel necessary to remove the installed software and driver files of your USB 2.0 Card Reader, please refer to following instructions. 1. Unplug the reader from USB port. Click Start, and then click Programs. 3. - Page 14 Setup for Mac OS Software Setup Install device driver according to following instructions: Insert the Setup Disc into the CD-ROM drive of your Macintosh computer. Double-click the CD-ROM icon on the desktop, and then run the USB Reader Installer application, the content of Read Me appears.
- Page 15 Setup for Mac OS The Installer Dialog appears. Select USB Reader Installer in the pop-up menu and then click on the Install button to install the device driver. 4. A warning dialog will appear on the screen telling you that you should quit all running applications before installation.
- Page 16 Setup for Mac OS Click Continue button to start copying files. Click Cancel button if you want to quit other running applications first. 6. After files copying is completed, the Restart dialog appears. Click Restart button to restart the system or click Quit button to exit the installer.
- Page 17 Hardware Setup Setup for Mac OS Hardware Setup Installing the USB 2.0 Card Reader to your system is easy. After completing device driver installation and restarting your system, simply plug your USB 2.0 Card Reader into available USB port on your Macintosh computer, then the system will do the installation.
- Page 18 Using the Reader Setup for Mac OS Using the Reader Showing a disk icon on desktop: Connect your USB 2.0 Card Reader to the USB port on Mac, then insert your storage card into the slot on the USB 2.0 Card Reader, a disk icon will appear on desktop representing the card.
-
Page 19: Uninstall Driver
Uninstall Driver Setup for Mac OS Uninstall Driver When you intend to remove the installed driver files, please repeat step 1 to 3 in Software Setup , but in the installer dialog, choose Uninstall in the pop-up menu. Click Uninstall to remove driver files. After uninstallation, a warning showing Some files /folder could not be deleted may appear. -
Page 20: Troubleshooting
Troubleshooting Troubleshooting Troubleshooting How to use USB 2.0 Card Reader on Linux system? The kernel code be should 2.4.0 or later versions. Then, the kernel code must be edited manually. Please refer to the file LINUX_HOWTO.txt in the Setup CD for instruction of editing source code. - Page 21 Specifications Host Computer I. PC IBM PC compatible computer with USB 2.0/1.1 support Windows 98/98SE/ME/2000/XP Linux(kernel code 2.4.0 or later versions) II. Mac iMac series, iBook series, Power Mac G4 series, Power G3 w. USB support, and Power Book w. USB support. Mac OS 8.6 or later versions Supported Cards 3-in-1 Reader...