LOGIClink is a connectivity hub for intelligent, electrically height-adjustable desks. safety and accident prevention and the basic norms and specialist standards applicable to the The product is available in two variants – Personal and Corporate. LOGIClink has a presence specific application.
The setup location must be level, vibration-free and on the front edge of the table is visible and that LOGIClink requires at least 5 cm clearance free from dirt, dust, etc. Ensure that there is no excessive exposure to dust or toxic or corrosive to metal parts and cables on all sides.
5. Finally, plug the mains cable into the power outlet. OPERATION FIG. 5: STANDARD CONFIGURATION 4.1 Adjust table height Press the UP or DOWN button on the bottom of LOGIClink to adjust the table height. Fig. 7: Assemble system Fig. 11: Connection to SMARTneo controller 4.2 Restart...
Always provide the product name and the revision status according to the type plate with any support re- The LOGIClink control element is maintenance-free for its entire service life. If cleaning is necessary, wipe off LOGIClink with a soft, dry cloth.
Page 7
Smart office solutions Swedstyle AB. Box 171, SE-567 24 Vaggeryd, Sweden info@swedstyle.se +46 393-363 60 www.swedstyle.com...
Need help?
Do you have a question about the LOGIClink and is the answer not in the manual?
Questions and answers