Advertisement
OPERATING TOASTER
1. Insert the plug into a suitable mains supply socket and turn the
power on.
2. Place up to four slices of bread, muffins, or bagels into bread
slots.
3. Select the desired browning setting, from No.1 to No.9 on the
browning control knob.(No.1-lightest, No.9-darkest).
When using the toaster for the first time we suggest you toast on
number 5. Varying types of bread and personal preference may
require a different browning setting.
4. Press the carriage control lever down until it clicks into place.
Toasting cycle will automatically commence. Please note: if the
toaster is not plugged in and switched on at the power point the
carriage control lever will not click into place.
5. The toaster turns off when the desired toast color is achieved and
automatically raises the toast. The toasting process can be
stopped at any time by pressing the cancel button.
TOASTING FROZEN BREAD: To toast frozen bread, place the
bread into the bread slots and select the desired browning setting.
Press the carriage control lever down until it clicks into place then
press the frozen button.
REHEATING TOAST: The toaster allows you to reheat toast without
additional toasting. To reheat, place toast into bread slots, lower the
carriage control lever until it clicks into place and press the reheat
button.
CHECKING BROWNING BREAD: The toaster allows you to lift the
carriage control lever up to look over the toast color in any working
state without cancelling the toasting process. Do not touch the
bread during checking. Release the carriage control lever, the
bread will return to the slots to continue being toasted. If you are
satisfied with the toasted bread, press the cancel button to stop
further toasting.
In the unlikely event that the bread or crumpet becomes jammed,
switch the toaster off at the power outlet, remove the plug from the
supply socket and carefully ease the bread out of the toaster,
ensuring that you do not damage the element.
CARE AND CLEANING
1. Always turn the power off, remove the plug and allow the toaster
to cool before cleaning.
2. To remove any crumbs from the toaster, slide out the crumb tray
from under the toaster, empty and replace in the toaster before
using it again.
3. Wipe the outside of the toaster with a slightly dampened cloth
and polish with a soft dry cloth.
4. Do not immerse the unit in water.
5. To clean the interior, turn the toaster upside down over the sink
and shake crumbs free.
The crumb tray should be cleaned regularly. Do not allow
breadcrumbs to accumulate in the bottom of the toaster.
Backed by the Nero 1 Year Warranty I Imported By R Weatherdon & Co P� Ltd
www.weatherdon.com.au I Made in China
Images in this manual are for illustrative purposes only.
Due to constant improvements, we advise that changes to the design,
material, specifications and product configuration may occur at any time
without notice.
Advertisement
