Advertisement
Quick Links
CARBON FIBER REACH KIT MANUAL
Thank you for your purchase of the Cen-Tec Systems carbon
fiber Reach system designed for cleaning of elevated surfaces
to a height of 40 feet without the use of ladders or elevated
platforms. The 94753 Reach system allows cleaning with one,
two or three lightweight carbon fiber poles as necessary to the
application. A full compliment of adaptor wands and cleaning
nozzles as well as convenient storage bags for storage and
transport are all included in the solution.
Contact Information
1807 Morrissey Drive • Bloomington, IL • 61704 • US
Phone: 309-664-0328 • Toll Free: 800-833-2822 • Fax: 309-663-8766
E-mail: help@centecsystems.com • Website: www.centecsystems.com
Advertisement
Summary of Contents for Cen-Tec CARBON FIBER REACH KIT
- Page 1 CARBON FIBER REACH KIT MANUAL Thank you for your purchase of the Cen-Tec Systems carbon fiber Reach system designed for cleaning of elevated surfaces to a height of 40 feet without the use of ladders or elevated platforms. The 94753 Reach system allows cleaning with one, two or three lightweight carbon fiber poles as necessary to the application.
- Page 2 The primary pole system supporting the Cen-Tec carbon fiber Reach series is comprised of three carbon fiber telescopic pole each pole measuring 6 foot collapsed and extending to 11 feet maximum length. The set is comprised of a base pole connecting to the vacuum hose. A middle extension pole, and a top pole for engaging the adaptors wands for use of the wide range of nozzle.
- Page 3 The cuff can be attached to a 1.5” hose for smaller vacuums such as backpacks. The poles can be easily extended without the use of tools using a positive snap release system which can be re-engaged to secure the wand at the desired length.
- Page 4 Each internal pole has red warning bands alerting you to the approaching end of the extension. Once the red band comes into view to insure a stable connection and avoid damage to the wands collapse the wand until the red band disappears and lock the wand in place.
- Page 5 Each of the four adaptor wands for holding the tool are designed to lock on to adaptor mounted on the top carbon fiber wand in the system for a positive connection that will not separate during use. Each of the four adaptor wands features an ABS compression locking system for securing the cleaning nozzle to the wand.
- Page 6 TITANUS When cleaning tasks day to day are at heights above 30 feet consider the 3 motor Titanus which provides 360 CFM of airflow demanded when working at heights above 30 feet. The Titanus features a tangential entry point, cyclonic filtering cone, and a washable HEPA filter that captures fine particulate.
- Page 7 When using three poles it is helpful to place the base pole against a fixed surface position yourself at a point on the middle extension pole and use the pivot base pole as a pivot point to walk the poles up to the vertical position. When applications require the use of multiple poles begin by fully extending the upper poles first which can’t be extended once elevated leaving only the base pole collapsed for adjustment as needed to match the surface being cleaned.
- Page 8 Replacement Parts 60093 39 foot Carbon Fiber Cleaning Pole Set 60291 Chrome Plated Locking Adaptor for Carbon Fiber Reach 60302 Lower Adapter for Carbon Fiber Reach 68591 Locking 18” Straignt Extension with ABS Compression Collar in Black 68613 Locking 24” 130 degree Extension wand with ABS Compression Collar in Black 68690 Steel Locking Collar...