If this equipment is used in a manner not specifi ed by the manufacturer, the protection provided by the equipment may be impaired. In no event will Plymovent be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
Page 4
This publication has been written with great care. However, the manufacturer cannot be held responsible, either for any errors occurring in this publication or for their consequences. 706303/081915/A Wireless Control System...
- Unit using in conjunction with, for example, an OS-3 Transport of The Unit You can fi nd this data on the identifi cation plate. The Wireless Control System is designed to be used primarily in conjunction with the Plymovent OS-3 control box. INTRODUCTION The manufacturer cannot be held liable for any damage to the unit due to shipping or mishandling.
Intended Use The product has been designed to be used in conjunction with a The Wireless Transmitter is to be used with a normally open Plymovent control box to operate a Plymovent exhaust (NO) set of dry contacts, such as what is provided in a extraction fan.
WARNING! Fire hazard Never install the control box in areas with fl ammable MAINTENANCE gases. The Wireless Transmitter requires a Size 2032 battery to be Unpacking changed as needed. Check that the product is complete. The package should contain: TROUBLESHOOTING Article No.
Fig. 8.2 System Detail DISPOSAL After life of the product, dispose it of in accordance with state or local regulations. 706303/081915/A Wireless Control System...
Need help?
Do you have a question about the Wireless and is the answer not in the manual?
Questions and answers