BTC PC180 User Manual

System Requirements
PC180
Ø Windows 98SE, Windows Me,
Windows 2000, Windows XP.
Web Cam
Driver software Installation
User's Guide
Attention:
Make sure to install the driver and software
Version 1.0
BEFORE plugging the camera into the USB port.
1. Insert the VP-EYE software CD into the CD-ROM
drive of your computer.
2. The installation
automatically. If the installation does not auto
play, run "Setup.exe" from the CD-ROM's root
directory. Click the "Driver" icon to install device
drivers.
3. Click "Next" to continue.
4. Select "Complete" and click "Next" to continue.
5. Select "Install" and click "Next" to begin
copying files.
program should start
6. After installation is complete, click "Finish" to
finish the installation.
7. Connect your Laptop Webcam to an available
USB port on your computer. Windows should
detect your new device. Click "Next" to continue.
8. Click "Continue Anyway" if you receive the
Windows Logo screen.
9. Click "Finish" once driver installation is
complete.
10. Please click separately "VP-EYE", "VP Hotline",
and "Web Eye" icons, and then follow the
on-screen instruction to install the application
software.
11. When all setup procedures are finished, the
operating system needs to restart.
12. Connect the camera to the USB cable and plug
the USB cable into an available port on the PC.
Attention:
If you have more than one image device in
your system, please select the CamMaestro as
the PC Camera device. In this way, you can
use this camera to capture images.
English
Version 1.0 June 2004 3100560350