Press Settings - Qnubu PREN0015 User Manual

Set
Temperature
Time
N/A
(No Need to Set)
-Set Temperature:
Press "SET" button 1x time, PV side number will blinking, the temp can now be set
using the "Up" &"Down" button to increase or decrease temperature.
.
-Set Compression Time:
Press "SET" button 2x time, PV side number will blinking, the time can now
be set using the "Up" &"Down" to increase or decrease time.
-Confirm setting: Presionar "SET" de nuevo para confirmar ajustes, la
pantalla volverá al inicio y las placas comenzarán a calentarse.
PRESSURE ADJUSTMENT:
Counterclockwise rotation to decrease pressure. Operate pressure adjust valve to increase or
decrease before platen. You can still increase or decrease the pressure for a short period of
time when the heater plate is in closed, but when the full closing pressure of the heater plate
has begun to implement, the pressure can not be adjusted at this time.If you need to reduce
or increase the pressure again, you can press the emergency stop button switch to rise of the
heater plate and reduce or increase pressure again.
It is recommended that you adjust the pressure well before starting the formal
work and start the hot-pressing work formally. Pressure does not need to be
adjusted every time. If the same pressure is needed next time, it does not
need to be adjusted again. It can work directly under pressure.
Down Up
CONTROLS
TOP PLATEN
DO NOT FORCE THE PRESS!
IF YOU TRY TO APPLY MORE PRESSURE, IT MAY DAMAGE THE PRODUCT.
PRESS
SETTINGS
N/A
CONTROLS
BOTTOM PLATEN
Clockwise rotation to increase pressure and
Temperature
N/A
(No Need to Set)
N/A
(No Need to Set)
TIP