Table of Contents
Advertisement
Quick Links
Product Specs
HANDCARE
Hand Sanitizer Station
Description
The ATPGroup Hand Sanitizer Station is a free-standing stainless steel industrial hand sanitizer
dispenser with an easy-to-use foot pump that allows for hands-free usage. Designed to pump liquid
or low-viscosity products, it has a built-in atomizer to help reduce over-usage and eliminate waste.
Ideal for production facilities, warehouses, office spaces, tasting rooms, hospitality venues, food
preparation areas, visitor centers, or any public space.
Dimensions
• Total height: 44 in.
• Height to spray head: 42 in.
• Dispenses per gallon: adjustable
• Shipping weight (single unit): 31 lbs.
• Shipping dimensions (single unit): 11" x 11" x 46"
Options
• Jug rack, SS, 1 gallon, round/square
• Jug rack (locking), SS, 1 gallon, round/square
• Safe Flow Lid
for 1 gallon jugs (includes suction tube & strainer)
TM
Installation (see diagram on next page)
1. Floor-mounted units can either be free-standing on a non-skid mat for
portability or bolted to the floor for permanent positioning.
2. Immerse the suction tube with suction strainer into sanitizing solution.
3. Raise the container of sanitizing solution so that it is level with the discharge nozzle.
4. Prime the unit by repeatedly stepping on the foot pedal until it begins to spray. Initial priming
might take several strokes, particularly if a gel or thick sanitizing solution is being used.
5. Once primed, place the container of sanitizing solution in the (optional) jug rack.
6. Adjust number of dispenses with the "adjustment bolt", using the locking nut to hold it in place.
Tighten for less dispenses per gallon and loosen for more dispenses per gallon.
Directions
Place hands under nozzle and step on the foot pedal.
Please refer to the SDS for safe handling requirements.
Manufacturer assumes no liability for the use or misuse of this unit.
1230 Shiloh Road, Windsor, CA 95492
2 Madison Avenue, Larchmont, NY 10538
www.ATPGroup.com
Tel: (707) 836-6840 Fax: (707) 836-6843
Tel: (914) 834-1881 Fax: (914) 834-4611
The information contained in this document is correct to the best of our knowledge as of the revision date. However, no warranties or guarantees are
expressed or implied by this document. For more information contact your ATPGroup representative or visit www.ATPGroup.com
Rev. 1.0
Updated 5/8/20
Advertisement
Table of Contents
Summary of Contents for ATP Electronics HANDCARE
- Page 1 Product Specs HANDCARE Hand Sanitizer Station Description The ATPGroup Hand Sanitizer Station is a free-standing stainless steel industrial hand sanitizer dispenser with an easy-to-use foot pump that allows for hands-free usage. Designed to pump liquid or low-viscosity products, it has a built-in atomizer to help reduce over-usage and eliminate waste.
- Page 2 Product Specs HANDCARE Cleaning & Sanitizing Cleaning & Sanitizing External Surface Only 1. Cleaning: Wipe down or pressure wash external parts with mild stainless steel cleaner. 2. Sanitizing: Use sanitizers designed for stainless steel and plastic surfaces. Cleaning & Sanitizing both Internally & Externally 1.
- Page 3 Product Specs HANDCARE Troubleshooting Guide Problem Startup Maintenance A) Will not draw sanitizer. 3, 6, 8, 9, 10, 11 B) Using too little sanitizer. 7,10 C) Using too much sanitizer. D) Dispenses inconsistent amount of sanitizer. Possible Cause / Solution Startup 1.
Need help?
Do you have a question about the HANDCARE and is the answer not in the manual?
Questions and answers