Advertisement
4.5. Take the engine mounting plate and insert it through the tube at the top of the main upright. Rotate the plate until one of the holes in
the inner tube is aligned with a hole in the outer tube and insert the locking pin (13).
Take the handle and insert it into the hole in the part of the turning plate tube protruding through the top of the main upright.
4.6.
Attach the adjustable mountings to the turning plate using M14x60 bolts (12), M14 washers (7), M14 lock washers (6) and M14 nuts (5).
4.7.
To fold up the legs remove the 'R' clips (15) from the Ø16x110 pins (11) furthest from the rear of the frame and pull out the pins. Fold the
4.8.
legs up. Always retain the legs in the upright position by re-inserting the pins (11) through the holes in the frame directly in front of the
folded legs. Retain the pins (11) with the 'R' clips (15).
Item
1
2
3
4
5
6
7
8
9
10
11
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Page 1 of 1
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Parts Information:
Folding Engine Stand 900kg
Model No: ES900F.V2
Part No.
Description
SN8.S
STEEL NUT M8 ZINC DIN934 (SINGLE)
ES900F. V 2-02
LOCK WASHER (M8)
ES900F. V 2-03
WASHER (M8)
ES900F. V 2-04
BOLT (M8 X 20mm)
SN14.S
STEEL NUT M14 ZINC DIN934(SINGLE)
ES900F. V 2-06
LOCK WASHER (M14)
ES900F. V 2-07
WASHER (M14)
ES900F. V 2-08
BOLT (M14 X 100mm)
ES900. V 2-04
WHEEL,SWIVEL CASTOR (90x10x30x120)
SS814.S
HEX HEAD SET SCREW M8x14mm SINGLE
ES900F. V 2-11
PIN(16 X 110)
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
01284 703534
Original Language Version
Item
Part No.
Description
12
ES900F. V 2-12
BOLT (M14 X 60mm)
13
ES900F. V 2-13
PIN
14
ES350. V 2-15
WHEEL,CASTOR (4 BOLT FIXING)(75x8x30x100
15
ES900F. V 2-15
LOCKING PIN
16
ES900F. V 2-16
HANDLE
14
ES900F. V 2-17
MOUNTING ARM
18
ES900F. V 2-18
SUPPORT
19
ES900F. V 2-19
MAIN POST
20
ES900F. V 2-20
BASE FRAME
21
ES900F. V 2-21
LEG
sales@sealey.co.uk
www.sealey.co.uk
sales@sealey.co.uk
fig.1
ES900F. V 2 Issue 2 PL 10/11/17
www.sealey.co.uk
ES900F.V2
Issue: 2(H,F) - 28/03/18
Advertisement
