Advertisement
969400 • A-40 SS Airless Foam Wand
SAFETY & OPERATIONAL PRECAUTIONS
For proper performance do NOT modify, substitute nozzle, hose diameter or length.
Manufacturer assumes no liability for the use or misuse of this unit.
Wear protective clothing, gloves and eye wear when working with chemicals.
Always direct the discharge away from people and electrical devices.
Follow the chemical manufacturer's safe handling instructions.
TO INSTALL (REFER TO DIAGRAM ON NEXT PAGE)
1. Remove the rinse nozzle and quick connect the airless foamer to your trigger gun. (1/4" quick connect).
TO OPERATE
1. Remove the rinse nozzle and quick connect the foam wand to your trigger gun as shown in the diagram. If your trigger gun doesn't have quick disconnects you will have to
install them.
2. Hold the trigger gun firmly and direct the discharge in a safe direction. Pull the trigger and begin foam application. (Ensure chemical is designed for foaming)
- Page 2 -
Advertisement
