Arcan ALSS15 Quick Start Manual

Arcan ALSS15 Quick Start Manual

1,500 lb. under hoist support stand

Advertisement

Quick Links

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
BEFORE USING THESE STANDS, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using these stands. It is also the responsibility of
the stand owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost
or not legible, contact Arcan® Professional Tools for replacements. If the operator is not fluent in English, the product and safety
instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his
designee, making sure that the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

WARNING
The use of portable automotive lifting and support devices is subject to certain hazards that cannot be prevented by mechanical means,
but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its
proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly secured loads, overloading,
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

WARNING
• Read, study, understand and follow all instructions before using.
• User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.
• This stand is intended to assist in supporting under vehicle components, not the vehicle.
• Inspect the stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing hardware or
components. Take corrective action before using the stand.
• Center load on saddle. Do not use ends of saddle to support load.
• Adequately support the vehicle before starting repairs.
• Be sure vehicle, vehicle component and stand are stable before performing any work.
• Do not use beyond rated capacity. Do not shock load.
• Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer's
authorized representative.
• Use only on a hard level surface capable of supporting the load.
• Failure to heed these warnings may result in fatal personal injury and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

WARNING
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS
could cause accidents resulting in serious or fatal personal injury and/or property damage.
ALSS15
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
1,500 lb. Under Hoist Support Stand
For Technical Questions, Call: 1-800-879-7316
WARNING: Indicates a hazardous situation
WARNING
which, if not avoided, could result in death
or serious injury.
1
Model ALSS15
09/06/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALSS15 and is the answer not in the manual?

Questions and answers

Summary of Contents for Arcan ALSS15

  • Page 1 If the manual or product labels are lost or not legible, contact Arcan® Professional Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
  • Page 2 Model ALSS15 1,500 lb. Under Hoist Support Stand For Technical Questions, Call: 1-800-879-7316 OWNER'S MANUAL SETUP PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL IN ORDER TO IDENTIFY PARTS. 1. Screw the post support in the round base.
  • Page 3 Model ALSS15 1,500 lb. Under Hoist Support Stand For Technical Questions, Call: 1-800-879-7316 PARTS DRAWING AND PARTS LIST Ref No. Part No. Description RS150014 Base - Black Cotter Pin Washer Clevis Pin Post Support Post RS6809A13 Bearing Assembly RS6809A14 Handle Grip each (Black)
  • Page 4 BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. Arcan® Professional Tools will repair or replace its Arcan® Professional Tools branded products which fail to give satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.

Table of Contents