OVERVIEW Thank you for purchasing the AZiO USB 2.0 internal Multi- Card Reader/Writer, one of the most stylish and practical internal flash memory card reader/writer solutions available. This internal multi-card reader kit is very easy to install, is memory card hot-swappable, and is backed by AZiO Corporation’s 1-year Limited Warranty.
Page 3
CARD READER/WRITER INSTALLATION [STEP 1] First power off your computer and then remove the computer’s cover. Install the Multi-Card Reader/Writer into an available 3.5” drive bay of your computer.
Page 4
[STEP 2] Securely fasten the Multi-Card reader to the drive bay with the supplied mounting screws.
Page 5
[STEP 3] Connect the card reader’s 4-pin USB connectors to the motherboard’s internal USB pin-out headers according to its pin assignments. On most motherboards, the USB header / pin-out consists of 9 pins arranged in 2 rows and each header allows for 2 USB connects (i.e.
SOFTWARE INSTALLATION USB 2.0 Driver Installation • For Windows XP, Windows 2000, Windows ME, MAC OS 9.x and MAC OS 10.x or higher, no drivers are required. • For Windows 98SE, please visit our website at www.aziocorp.com/support.php corresponding driver. Unzip the driver file and run the setup file. Follow the installation wizard until setup is completed.
SERVICE & WARRANTY Service If you need assistance with the product, please check the comprehensive user’s manual included in the software CD or visit our website at www.aziocorp.com for frequently asked questions and troubleshooting tips. Otherwise, you may contact our dedicated customer care team. There are several ways to contact us: By Phone: (909) 468-1198 By Email:...
Page 8
The warranty does not cover any damage caused by negligence, abuse, or non- authorized modifications. To the maximum extent permitted by applicable law, in no event shall AZiO Corporation, its affiliates, or its dealers be liable for any special, incidental, indirect or consequential damages...
Page 9
FCC Information FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the CAR102-I31 and is the answer not in the manual?
Questions and answers