Nordmende NM24LEDHDA Quck Start Gude

1
Insert the batteries into the Remote Control
Remove the back cover to reveal the battery compartment.
Insert two size AAA batteries. Make sure the (+) and (-)
signs match (observe correct polarity). Do not mix old and
new batteries. Replace only with same or equivalent type.
Place the cover back on.
2
Connect the antenna to your TV
3
Connect the TV to the mains socket
4
To switch the TV on
Connect the power cord to the mains socket. Then the
standby LED lights up.
To switch on the TV from standby mode either;
1. Press the " " button, a numeric button or Programme
+/- button on the remote control.
2. Press the middle of the side function switch on the TV in.
Qu ck Start Gu de
NM24LEDHDA
REAR SIDE OF THE TV
UK plug
...and switch on
insert plug...
Aer al
or
Cable