Before Use; Installing The Freezer; Preparation Prior To Use - Haier HVF170VW User Manual

BEFORE USE

Installing the freezer

The freezer should be placed on a flat and solid surface.If the appliance is
placed on a pedestal,flat strong and fire resistant materials must be used.
Never use the foam packing material as a pedestal.If the freezer by turning
them clockwise or counterclockwise to increase or decrease the height of the
freezer.Do not place the freezer in direct sunlight or in a place where it is
exposed to external heating source,this will ensure the optimum performance
of the Freezer.
Install the appliance in a well ventilated place and a space of at least 100mm must be kept above the
freezer 20mm space on each side,and 50mm behind the freezer.
Never place the freezer in a damp area or location where it may be splashed with
water.Clean and dry any water splashes an stains with soft cloth immediately to prevent rust.
Do not place the freezer where the temperature is too low(under 5℃).Do not operate freezer outside.

Preparation prior to use

Remove all package parts,the foam base and the adhesive tape fixing accessories.
Place the freezer in location(please refer to Placing Environment).
Clean the inside and outside of the freezer before use(please refer to Defrosting and Cleaning) After
the appliance has been leveled and cheaned,let it stand for10-30 minutes before switching it on.
7
.....