Table of Contents
Advertisement
Quick Links
Thank you for purchasing the Yoshitake product. It is important that you carefully read through
this manual before using it. Keep this manual in convenient place so you can refer to it as you
need.
Please note the following caution icons and conventions used in this manual.
－ － － －
Warning
Caution
Models SU-50/50H/50S
Instruction Manual
This symbol indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It is also used to alert against
property damage.
Contents
Purpose ······························································ 1
1 . Specifications ·················································· 1
3 .
4.1 Example of piping ······································· 3
5.1 Warning and caution upon operation ··········· 4
6 .
6.1 Troubleshooting ·········································· 4
6.2 Warning and caution upon inspection················ 4
6.3 Removal of the screen ································ 5
6.4 Assembly after disassembly ························ 6
6.5 Exploded drawing ·········································· 7
After Sales Service
Strainer
······················ 1
······························ 2
－ － － － －
E PDT-183b
■
■
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yoshitake SU-50H
Summary of Contents for Yoshitake SU-50H
- Page 1 Models SU-50/50H/50S Strainer Instruction Manual Thank you for purchasing the Yoshitake product. It is important that you carefully read through this manual before using it. Keep this manual in convenient place so you can refer to it as you need.
- Page 2 Purpose This product is mainly used for removing dust from cooling and industrial water. 1 . Specifications Model SU-50H SU-50 SU-50S Nominal Size 50A, 65A, 80A, 100A, 150A Applicable Fluids Cold and hot water,Oil,Other non-dangerous fluids Maximum Pressure 2.0 MPa 1.0 MPa...
- Page 3 Chart 2 Dimensions & Weight (mm) Nominal Weight (kg) ２ １ Size SU-50 ･ 5 0H SU-50S SU-50 ･ 5 0H SU-50S 64.5 R1/4 R3/4 13.0 13.0 64.5 R1/4 R3/4 15.0 15.0 R3/8 20.0 20.0 100A 166.5 R3/8 29.0 28.0 150A R3/8 R1-1/2...
- Page 4 Installation 4.1 Example of piping Fig. Example of Piping ４ Installation of pressure gauges at either end of the strainer will enable you to tell the clogging ( 1 ) condition of the strainer by looking at the loss of pressure. Upon installation, make sure that cover comes at the top.
- Page 5 Chart 4 Dimensions required for removal of the screen Nominal Size ( mm) ( mm) Ａ Ｂ 50, 65A 100A 150A 5. Operation 5.1 Warning and caution upon operation Warning （ 1 ） P lease make sure that there is no danger at the pipe end before pouring the fluid. ※...
- Page 6 Caution （ 1 ） Please clean the screen regularly since if waste and scales clog the strainer, the area for fluid flow decreases, thereby obstructing smooth flow. ※ N eglect will result in too much pressure loss leading to damage of the screen and piping system. 6.3 Removal of the screen Check the pressure gauge so that there is no pressure inside the product.
- Page 7 6.4 Assembly after disassembly (1) Clean body and the portions on cover t hat come in contact with the O-ring. ① ② (2) Assemble screen onto the cleaned body. ④ (3) Apply silicone grease onto a new O-ring and assemble it onto the slot on the cover ⑧...
- Page 8 6.5 Exploded drawing Model SU-50S Model SU-50 ･ 5 0H Fig.10 Exploded drawing ※ The parts framed rectangle are consumable items. The timing of replacement are based on below chart. Name of parts Durable (Rough standard) O-Ring When the cover is replaced or 3 years.
Need help?
Do you have a question about the SU-50H and is the answer not in the manual?
Questions and answers