Download Print this page

Scott Aerator De-Icer Dock Mount Aassembly Instructions

Download this manual

We at Scott Aerator thank you for your purchase.

ensure that you are completely satisfied with your new De-Icer and

that it continues to operate smoothly for many years to come.

Please take a few moments to read through this document for

proper assembly, installation and maintenance to maximize the

operating life of the unit.

This Kit Includes

1 - DE-ICER HOUSING ASSEMBLY

1 - STAINLESS-STEEL POLE

1 - DOCK PLATE

1 - PACKET OF LUBRICATING COMPOUND

2 - STAINLESS STEEL THUMB SCREWS

4 - STAINLESS STEEL WASHERS

4 - SELF TAPPING STAINLESS STEEL SCREWS

Tools Needed

PHILLIPS STYLE SCREW DRIVER

TWO 1/2" WRENCHES (OR PLIERS)

Dock Mount

It is our goal to

Need help?

Do you have a question about the De-Icer Dock Mount and is the answer not in the manual?

Page 1 Dock Mount We at Scott Aerator thank you for your purchase. It is our goal to ensure that you are completely satisfied with your new De-Icer and that it continues to operate smoothly for many years to come. Please take a few moments to read through this document for proper assembly, installation and maintenance to maximize the operating life of the unit.
Page 2 Assembly Instructions 1. Begin the assembly of your Scott De-Icer dock mount model by loosening the stainless-steel bolt from the yoke assembly. Adjust the grey dock-mount housing to the desired angle for water flow and tighten bolt to secure in place. We recommend that the angle is adjusted at a 45 degree angle facing upward toward the surface.
Page 3 Maintaining your De-Icer Dock Mount Model Most of our products require very little to any maintenance. Under normal operating conditions, you should enjoy many years of trouble free service from the unit. As a rule of thumb, the propeller assembly on our De-Icer should be changed every five years.
Page 4 All other product components are warranted for one year from date of purchase. Scott Aerator will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory inspection establishes that the part was defective.

De-icer