GENERAL SAFETY WARNINGS Read all safety warnings, instructions, WARNING! illustrations and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY ...
Page 5
PERSONAL SAFETY Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Stay alert, watch what you are doing and use common sense when operating a blower.
Page 6
USE AND CARE Do not force the blower. Use the correct blower for your application. The correct blower will do the job better and safer at the rate for which it was designed. Do not use the blower if the switch does not turn it on and off. Any blower that cannot be controlled with the switch is dangerous and must be repaired.
ELECTRIC BLOWER SAFETY WARNINGS This electric blower is a dual function device designed for blowing and sucking in the around the garage, shop or home. It can be used to remove small debris, dust, shavings, leaves, or blow dry water on a smooth surface.
PRODUCT SPECIFICATIONS Rated voltage : 230V~50Hz Rated Input Power : 600W Rated no load speed : 6000-14000 rpm Weight : 1.36 Kg Blow rate : 3.3 m /min : Class II Protection class SYMBOLS On the product or on the packing box, the rating label and within these instructions you will find among others the following symbols and abbreviations.
SETUP UNPACKING AND ENSURING Unpack all parts and lay them on flat, stable surface. Remove all packing materials. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage, do not use the product but contact your dealer. Using an incomplete or damaged product represents a hazard to people and property.
GENERAL OPERATION Check the product and as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Double check that the accessories and attachments are properly fixed. Always hold the product on its handle. Keep the handle dry to ensure safe support.
Page 12
DUST COLLECTION Mounting the nozzle and dust bag for dust collection: For dust collection, mount the Dust Bag (7) at the Blast Port and Nozzle at the Suction Port. To remove Dust Bag and Nozzle (1), simply pull out by first turning in the opposite direction.
Page 13
CLEANING AND STORAGE Keep the product clean. Remove debris from it after each use and before storage. Regular and proper cleaning will help ensure safe use and prolong the life of the product. Clean the product with a dry cloth. Use a brush for areas that are hard to reach. ...
TROUBLESHOOTING Make sure there's power in the socket you have the blower plugged into. Unplug the blower and check that the impeller or fan has not been jammed by a stick or other object so that it cannot turn. ...
Page 15
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.