Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Burlington Manuals
  4. Shower Cabins
  5. C6S
  6. Manual

Burlington C6S Manual

Slider
Hide thumbs

Advertisement

Quick Links

Download this manual
Slider 1100 - C6S
Slider 1200 - C7S
Before Installation:
Check the contents of the pack carefully before installation.
The tray MUST be installed level and fully sealed to the tiles.
Handle with care. Impacts can damage both the glass and the frame.
Check for any hidden pipes or cables before drilling holes in the wall.
The enclosure is reversible: " door can be either left or right opening. "
In the remainder of this manual the illustrations will only show the right hand installation of the slider door.
The parts marked "LH" or " RH" would be only suitable for the relative shower enclosure.
The wall fixings supplied may not be suitable for your installation. You may need to source alternatives
depending on the construction of the wall you are fixing to.
Follow each step in turn.
Care and Cleaning:
Do not use solvents or abrasive material or chemicals to clean the enclosure.
Only clean using soapy water and a soft cloth, rinse thoroughly afterwards.
LH
1 - 8
RH
F

Advertisement

loading
Need help?

Need help?

Do you have a question about the C6S and is the answer not in the manual?

Questions and answers

Related Manuals for Burlington C6S

Summary of Contents for Burlington C6S

  • Page 1 Slider 1100 - C6S Slider 1200 - C7S Before Installation: Check the contents of the pack carefully before installation. The tray MUST be installed level and fully sealed to the tiles. Handle with care. Impacts can damage both the glass and the frame.
  • Page 2 Tools required: SILICONE Ø6.0mm Ø3.0mm Parts supplied: Slider Door B002 B013 B012 B009 B039 B001 B042 B041 B043 B006 B014 B016 B015 B026 B018 B045 B046 B047 B038 B039 B012 B002 B001 B013 ST3.5x10mm B040 B006 B009 B041 B042 B043 ST3.5x16mm B018 B015...
  • Page 3 At this step the wall profile on the handle side should not be fixed to the wall, and should be done at step 4. B015 B014 B015 B016 B014 A(mm) Item A (mm) 1100 Slider door 1060 ~ 1100 1200 Slider door 1160 ~ 1200 3 - 8...
  • Page 4 4 - 8...
  • Page 5 Once you have checked that the door opens and closes correctly fix the door to the wall channels. Inside Only if adjustment is required. Problem Resolution Internal 5 - 8...
  • Page 6 Internal 6 - 8...
  • Page 7 B045 B046 B047 Make sure the door is closed well and there are no gaps. As indicated in the diagram between the clasps of the mecha- nism place the catch over the glass, and tighten to glass. 7 - 8...
  • Page 8 8 - 8...
  • Page 9 200 Inline panel - C15 300 Inline panel - C16 400 Inline panel - C17 Hinged Door and Inline Panel (Pages 5 - 10) 1 - 17...

  • Page 10: Tools Required

    Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Inline Panel Box - C15/C16/C17 B002 B052/B055 B028 B009 B033 B029 B034 B030 B016 B061 B062 B031/B032 B013 B012 B061 B062 B009 B034 B002 B027 B028 ST4*35mm B030 B029 B033 B016 B012 ST3.5*10mm B013 B031/B032...
  • Page 11 Tools required: SILICONE Ø6.0mm Ø3.0mm Parts supplied: Hinged Door Box - C19/C20/C21 B005 B004 B006 B001 B002 B008 B009 B010 B011 B012 B013 B018 B014 B015 B016 B025 * B022/B023/B024 B017 * B019/B020/B021 B026 B002 B004 B006 B001 B003 B005 B007 B011 B010...
  • Page 12 Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Side Panel Box - C11/C12/C13/C14 B016 B034 B033 B052/B056 B028 B009 B002 B030 B029 B057 B059 B013 B012 B034 B009 B002 B027 B028 ST4*35mm ST3.5*16mm B030 B033 B029 B016 B012 ST3.5*10mm B060 B059 B013 B057...
  • Page 13 Hinged Door and Inline Panel (Pages 5 - 10) The hinged door is supplied for Right Handed installation. For Left Handed installation please loosen the hinges and reverse the glass as shown below. Left Hand Right Hand B026 B026 5 - 17...
  • Page 14 At this step the wall profile on the hinged side should not be fixed to the wall, and should be done at step 5. B015 B015 A (mm) Item 800 Hinged door 760 ~ 780 Item B (mm) 200 Inline Panel 200 ~ 220 300 Inline Panel 300 ~ 320...
  • Page 15 7 - 17...
  • Page 16 * Please note when cutting parts B019/B20/B21 a sharp fine tooth hacksaw should be used. Once you have checked that the door opens and closes correctly, fix the door frame to the wall channels. From inside drill 4 holes through door frame (in the marked positions). Fix using screws (B012), attach on the covers (B013).
  • Page 17 Only if adjustment is required. B026 B026 On the top rail drill through the outer and inner section as shown in diagram. B031/B032 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 9 - 17...
  • Page 18 B001 B001 B002 B004 B009 B002 B028 B002 B009 B008 B009 B010 B010 Inside B005 Hinged Door and Inline Panel Installation Complete 10 - 17...
  • Page 19 Hinged Door and Inline Panel with Side Panel (Pages 11 - 17) The hinged door is supplied for Right Handed installation. For Left Handed installation please loosen the hinges and reverse the glass as shown below. Left Hand Right Hand B026 B026 11 - 17...
  • Page 20 At this step the wall profile on the hinged side should not be fixed to the wall, and should be done at step 5. B015 Item A (mm) B015 800 Hinged door 760 ~ 780 900 Hinged door 860 ~ 880 Item B (mm) 700 Side Panel...
  • Page 21 20mm 13 - 17...
  • Page 22 * Please note when cutting parts B019/B20/B21 a sharp fine tooth hacksaw should be used. Once you have checked that the door opens and closes correctly, fix the door frame to the wall channels. From inside drill 4 holes through door frame (in the marked positions) Fix using screws (B012), attach on the covers (B013).
  • Page 23 Only if adjustment is required. B026 B026 On the top rail drill through the outer and inner section as shown in diagram. B031/B032 B033 B029 B034 B030 15 - 17...
  • Page 24 B001 B002 B002 B062 B009 B008 B009 B002 B004 B009 B001 B002 B028 B009 16 - 17...
  • Page 25 Install the supporting bar supplied with the side panel if necessary. On the top rail drill through the outer and inner section as shown in diagram. B052/B056 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 B010 Inside B010 B005 Hinged Door and Inline Panel with Side Panel Installation Complete 17 - 17...
  • Page 26 300 Inline panel - C16 400 Inline panel - C17 Hinged Door and 2x Inline Panel (Pages 5 - 10) 1 - 18...

  • Page 27: Tools Required

    Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Inline Panel Box - C16/C17 B002 B028 B009 B055 B033 B029 B034 B030 B016 B061 B062 B032 B013 B012 B061 B062 B034 B009 B002 B027 B028 ST4*35mm B030 B029 B033 B016 B012 ST3.5*10mm B013 B032...
  • Page 28 Tools required: SILICONE Ø6.0mm Ø3.0mm Parts supplied: Hinged Door Box - C19/C20/C21 B005 B004 B006 B001 B002 B008 B009 B010 B011 B012 B013 B018 B014 B015 B016 B025 * B022/B023/B024 B017 * B019/B020/B021 B026 B002 B006 B001 B003 B004 B005 B007 B011 B009...
  • Page 29 Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Side Panel Box - C11/C12/C13/C14 B016 B034 B033 B052/B056 B028 B009 B002 B030 B029 B057 B059 B013 B012 B034 B009 B002 B027 B028 ST3.5*16mm ST4*35mm B030 B033 B029 B016 B012 ST3.5*10mm B060 B013 B059 B057...
  • Page 30 Hinged Door and 2x Inline Panel (Pages 5 - 10) The hinged door is supplied for Right Handed installation. For Left Handed installation please loosen the hinges and reverse the glass as shown below. Left Hand Right Hand B026 B026 5 - 18...
  • Page 31 B015 A (mm) Item 800 Hinged door 900 Hinged door B014 Item B (mm) B015 300 Inline Panel 300~320 400 Inline Panel 400~420 B014 B016 B014 6 - 18...
  • Page 32 B011 B025 B006 7 - 18...
  • Page 33 Once you have checked that the door opens and closes correctly fix the door to the wall channels. From inside drill 4 holes through the door frame (in the marked positions). Fix using screws (B012), attach on the covers (B013). B012 B013 Inside...
  • Page 34 Only if adjustment is required. B026 B026 On the top rail drill through the outer and inner section as shown in diagram. B031/B032 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 9 - 18...
  • Page 35 B001 B002 B004 B009 B002 B002 B027/B028 B008 B009 B009 B010 B010 Inside B005 Hinged Door and 2x Inline Panel Installation Complete 10 - 18...
  • Page 36 Hinged Door and 2x Inline Panel with Side Panel (Pages 11 - 18) The hinged door is supplied for Right Handed installation. For Left Handed installation please loosen the hinges and reverse the glass as shown below. Left Hand Right Hand B026 B026 11 - 18...
  • Page 37 B015 A (mm) Item 800 Hinged door 900 Hinged door Item B (mm) 700 Side Panel 660 ~ 680 760 Side Panel 720 ~ 740 800 Side Panel 760 ~ 780 900 Side Panel 860 ~ 880 Item C (mm) 300 Inline Panel 300 ~ 320 400 Inline Panel...
  • Page 38 The moving door MUST be fitted to the inline panel attached to the wall. 13 - 18...
  • Page 39 20mm Once you have checked that the door opens and closes correctly fix the door to the wall channels. From inside drill 4 holes through the door frame (in the marked positions). Fix using screws (B012), attach on the covers (B013). B012 B013 Inside...
  • Page 40 B006 * Please note when cutting parts B019/B20/B21 a sharp fine tooth hacksaw should be used. 15 - 18...
  • Page 41 Only if adjustment is required. B026 B026 B031/B032 On the top rail drill through the outer and inner section as shown in diagram. B033 B029 B030 B034 B031/B032 Ø3.2mm Ø6.0mm On the top rail drill through the outer and inner section as shown in diagram. B016 B033 B029...
  • Page 42 B002 B008 B009 B002 B004 B002 B009 B062 B009 B001 B001 B002 B002 B028 B009 B027 B009 17 - 18...
  • Page 43 Install the supporting bar supplied with the side panel if necessary. On the top rail drill through the outer and inner section as shown in diagram. B052/B056 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 B010 Inside B010 B005 Hinged Door and 2x Inline Panel with Side Panel Complete 18 - 18...
  • Page 44 200 Inline panel - C15 300 Inline panel - C16 Sliding Door and Inline Panel (Pages 5 - 11) 1 - 18...

  • Page 45: Tools Required

    Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Inline Panel Box - C15/C16 B002 * B052/B055 B028 B009 B033 B029 B034 B030 B016 B061 B062 B031/B032 B013 B012 B061 B062 B009 B034 B002 B027 B028 ST4*35mm B030 B029 B033 B016 B012 ST3.5*10mm B013...
  • Page 46 Tools required: SILICONE Ø6.0mm Ø3.0mm Parts supplied: Sliding Door - C6S/C7S/C8S B002 B013 B012 B009 B039 B001 B042 B041 B043 B006 B014 B016 B015 B026 B018 B045 B046 B047 B038 B039 B012 B002 B001 B013 ST3.5x10mm B040 B006 B009 B041...
  • Page 47 Tools required: SILICONE Ø6.0mm Ø3.0mm Ø3.2mm Parts supplied: Side Panel Box - C11/C12/C13/C14 B016 B034 B033 B052/B056 B028 B009 B002 B030 B029 B057 B059 B013 B012 B034 B009 B002 B027 B028 ST3.5*16mm ST4*35mm B030 B033 B029 B016 B012 ST3.5*10mm B060 B059 B013 B057...
  • Page 48 Sliding Door and Inline Panel (Pages 5 - 11) B015 At this step the wall profile on the handle side should not be fixed to the wall, and should be done at step 5. B014 B014 B015 A (mm) Item 1200 Slider door 1160 ~ 1180 1400 Slider door...
  • Page 49 6 - 18...
  • Page 50 Once you have checked that the door opens and closes correctly fix the door to the wall channels. From inside drill 4 holes through the door frame (in the marked positions) Fix using screws (B012), attach on the caps (B013). B012 Internal B013...
  • Page 51 Only if adjustment is required. Resolution Problem Internal On the top rail drill through the outer and inner section as shown in diagram. B031/B032 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 8 - 18...
  • Page 52 B002 B001 B039 B009 B002 B027 B009 Internal 9 - 18...
  • Page 53 B045 B046 B047 Make sure the door is closed well and there are no gaps. As indicated in the diagram between the clasps of the mecha- nism place the catch over the glass, and tighten to glass. 10 - 18...
  • Page 54 Sliding Door and Inline Panel Complete 11 - 18...
  • Page 55 Sliding Door and Inline Panel with Side Panel (Pages 12 - 18) Item A (mm) 1200 Slider door 1160 1400 Slider door 1360 Item B (mm) 700 Side Panel 660 ~ 680 760 Side Panel 720 ~ 740 800 Side Panel 760 ~ 780 Item C (mm)
  • Page 56 20mm 13 - 18...
  • Page 57 Once you have checked that the door opens and closes correctly fix the door to the wall channels. From inside drill 4 holes through the door frame (in the marked positions) Fix using screws (B012), attach on the caps (B013). B012 B013 Only if adjustment is required.
  • Page 58 On the top rail drill through the outer and inner section as shown in diagram. B031/B032 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 15 - 18...
  • Page 59 B002 B002 B061 B041 B009 B009 B001 B001 B002 B002 B027 B028 B009 B009 Internal 16 - 18...
  • Page 60 B045 B046 B047 Make sure the door is closed well and there are no gaps. As indicated in the diagram between the clasps of the mecha- nism place the catch over the glass, and tighten to glass. 17 - 18...
  • Page 61 Install the supporting bar supplied with the side panel if necessary. On the top rail drill through the outer and inner section as shown in diagram. B052/B056 Ø6.0mm Ø3.2mm B016 B033 B029 B034 B030 Sliding Door and Inline Panel with Side Panel Complete 18 - 18...

This manual is also suitable for:

C7s11001200