Do you have a question about the Cosmo Ride and is the answer not in the manual?
Questions and answers
Walter
March 18, 2025
I cannot pair my cosmo control device, it keeps blinking, cannot even turn it off
1 comments:
Mr. Anderson
March 18, 2025
If your Cosmo Connected Cosmo Ride device keeps blinking and won't turn off, it may be desynchronized from the remote control. To fix this pairing issue, follow these steps:
1. Avoid Simultaneous Button Presses: Ensure that you are not pressing both indicator lights at the same time, as this can desynchronize the device from the remote control. 2. Turn Off and Restart: Press and hold the ON/OFF touch button on the back of the device for 3 seconds to turn it off. Then, turn it back on using the same method. 3. Use the Remote or Mobile App: Try turning the device off using the mobile application or by pressing the middle button on the remote control for 3 seconds. 4. Automatic Shutdown: If the device remains immobile for 2 minutes, it should turn off automatically. 5. Re-Pair the Device: If the issue persists, consider re-pairing the Cosmo Ride with the remote control or the mobile application.
If none of these steps resolve the issue, check for interference or reset the device as per the manufacturer’s instructions.
This answer is automatically generated
GB Fores
March 15, 2025
My Cosmo Connect Moto will not hold a charge after several yeas of use. Can anything be done?
1 comments:
Mr. Anderson
March 15, 2025
No, the Cosmo Connected Cosmo Ride battery is built-in and cannot be replaced or repaired. Attempting to open the case or replace the battery will void the warranty and may pose safety risks.
BEFORE FIRST USE: COSMO CONNECTED Find the user guide in other languages here: cosmoconnected.com/en/user-guide...
Page 3
Cosmo Ride from Cosmo Connected is a removable light that can be placed either on a helmet or on the seatpost. It offers different lighting modes which adapt to the surrounding brightness, as well as turning indicator lights. The brake light mode is also available when configured in "saddle" mode.
Page 4
Clean up your helmet with the provided cleaning wipe, let it dry. Place the adhesive, push strongly and wait for 24h before fixing the Cosmo Ride. Attach the Cosmo Ride Attach the Cosmo Ride...
Page 5
2nd click: 3rd click: 4th click: back screws with a Position light Position light Warning light Position light off cross-headed screwdriver. & warning light IMPORTANT: Simultaneously pressing the two indicator lights will desynchronise the Cosmo Ride and the remote control.
**Caution, the "brake light" mode will only be activated in saddle mode. In seatpost mode, the Cosmo Ride turns on / off in orange. In helmet mode, the Cosmo Ride turns on / off in red. Users shall comply with local regulation, which can prohibit the use of specific light modes or mounting positions.
Phone equiped with SIM GPS + GPS + Bluetooth smart 4. Even if it meets these requirements, your phone may not work properly with your Cosmo Ride and your remote control as the material and software may differ greatly from one phone to another. We try to test the product on an extensive list of phones.
RECOMMENDATIONS FOR USE • Do not try to replace the battery or open the case or take your Cosmo Ride apart. Each of these actions will void the warranty and may pose safety risks. The substances contained in batteries may be harmful for the environment or cause injury if handled and disposed of inappropriately.
(2) years following the initial purchase date by the ens user of a news COSMO CONNECTED product from a professional...
Page 10
COSMO CONNECTED does not guarantee the uninterrupted or error free operation of Cosmo Ride. Products sold by COSMO CONNECTED comply with the regulations in effect in France and the performance thereof is compatible with non-professional use. The products supplied by COSMO CONNECTED fully benefit without any additional payment, irrespectiveof the consumer's right to cancel and in accordance with the law, from: •...
Page 11
Reimbursements for products deemed non-compliant or defective will be completed as quickly as possible and no later than fourteen (14) days after COSMO CONNECTED is notified of the compliance defect or hidden vice. Reimbursement will be made to the customer’s bank account or by bank cheque payable to the customer.
Page 12
- improper product use or installation (use which is non-compliant with the intended use, installation or use that is non-com- pliant with the COSMO CONNECTED instructions or technical or safety standards in effect in the country where it is used, etc.);...
MORE GENERALLY, THERE IS NO WARRANTY EXTENDING BEYOND THE WARRANTY INDICATED HEREIN AND ANY IMPLICIT WARRANTY INCLUDING IMPLICIT WARRANTIES OF CURRENT COMMERCIAL USE OR SUITABILITY FOR CERTAIN PURPOSES IS EXPRESSLY EXCLUDED. NO RESELLER HAS THE RIGHT TO MODIFY THE CONDITIONS AND LIABILITY CLAUSES LISTED ABOVE. IC CAUTION: This device complies with Industry Canada licence-exempt RSS standard(s).
Page 14
• Consult the dealer or an experienced radio/TV technician for help. This device Cosmo Ride by Cosmo Connected complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, in-...
Page 15
COSMO CONNECTED. Unauthorized modification may void the equipment authoriza- tion from the FCC and will void the COSMO CONNECTED warranty. This device complies with FCC RF radiation expo- sure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the Cosmo Ride and is the answer not in the manual?
Questions and answers
I cannot pair my cosmo control device, it keeps blinking, cannot even turn it off
If your Cosmo Connected Cosmo Ride device keeps blinking and won't turn off, it may be desynchronized from the remote control. To fix this pairing issue, follow these steps:
1. Avoid Simultaneous Button Presses: Ensure that you are not pressing both indicator lights at the same time, as this can desynchronize the device from the remote control.
2. Turn Off and Restart: Press and hold the ON/OFF touch button on the back of the device for 3 seconds to turn it off. Then, turn it back on using the same method.
3. Use the Remote or Mobile App: Try turning the device off using the mobile application or by pressing the middle button on the remote control for 3 seconds.
4. Automatic Shutdown: If the device remains immobile for 2 minutes, it should turn off automatically.
5. Re-Pair the Device: If the issue persists, consider re-pairing the Cosmo Ride with the remote control or the mobile application.
If none of these steps resolve the issue, check for interference or reset the device as per the manufacturer’s instructions.
This answer is automatically generated
My Cosmo Connect Moto will not hold a charge after several yeas of use. Can anything be done?
No, the Cosmo Connected Cosmo Ride battery is built-in and cannot be replaced or repaired. Attempting to open the case or replace the battery will void the warranty and may pose safety risks.
This answer is automatically generated