Advertisement
Quick Links
QUICK START GUIDE
PE Wideband O2 Kit P/N: 50070102-01
WARNING
The PE Wideband O2 is intended for off-road use only. This
device is NOT waterproof. The sensor will get hot when
powered and MUST be connected to the powered O2 module
when installed in a running engine. Failure to do so will damage
the sensor. Fuels containing lead or 2-stroke oil will degrade
the sensor.
Performance Electronics, LTD assumes no responsibility for
any damage that results from incorrect installation or misuse of
this product. It is up to the end user to verify the correct setup
and determine the suitability for his or her speci c application.
WARNING:
Cancer And Reproductive Harm
www.P65warnings.ca.gov
Part Identi cation
D
C
G
A
H
A. O2 Conditioning Module
B. CAN Input Pigtail
C. CAN Output Pigtail
D. Bosch LSU 4.9 Sensor
See other side for more information
E
B
F
E. Mild Steel Weld In Bung
F. Mounting Holes
G. LED Status Indicator
H. Bluetooth Pairing Button
Advertisement
Summary of Contents for PE Wideband O2
- Page 1 WARNING The PE Wideband O2 is intended for off-road use only. This device is NOT waterproof. The sensor will get hot when QUICK START GUIDE powered and MUST be connected to the powered O2 module when installed in a running engine. Failure to do so will damage the sensor.
- Page 2 Calibration Points Pairing the O2 Module to a Smart Device Lambda = 0.14 x Vout =.58 • Download the PE Wideband O2 app from the iOS App Store or Google Play Lambda at 0.0 (V) 0.58 λ Store. Search for ‘PE Wideband’ or scan QR code below.