Read And Follow All Safety Instructions - Holiday Living INF-511613 Instructions Manual

SAFETY INFORMATION

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE
PRACTICED INCLUDING THE FOLLOWING:
• Read and follow all instructions that are on the product or provided with the product.
• Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and
clearances from power and lighting conductors.
• Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
• For a cord-connected or direct plug-in power unit, do not use an extension cord.
• For a cord-connected or direct plug-in power unit, do not use in a bathroom.
• For a cord-connected or direct plug-in power unit, do not install or use within 10 ft. of a pool.
WARNING
• RISK OF ELECTRIC SHOCK. When used outdoors, install only to a covered Class A GFCI
protected receptacle that is weatherproof with the power unit connected to the receptacle. If one
is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and
cord do not interfere with completely closing the receptacle cover.
• RISK OF ELECTRIC SHOCK. Mount the unit at a height greater than 1 ft. from the ground
surface.
• RISK OF FIRE: Installation involves special wiring methods to run wiring through a building
structure. Consult a qualified electrician.
• RISK OF FIRE: For a unit intended to be mounted greater than 1 ft. from the ground surface.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
No tools required for assembly.
SAVE THESE INSTRUCTIONS.
Lowes.com
4
ASSEMBLY INSTRUCTIONS
1. Remove all plastic fasteners and tags. Zip zipper of
inflatable (A).
2. Plug the fan power cord into the adaptor (B) and screw the
ring over the cable to fasten the plug. Then plug adaptor (B)
into a standard wall outlet. Fan will immediately begin to start
the flow of air. The inflatable (A) will then fully inflate.
3. Using the loops attached at the bottom of the inflatable (A),
insert stakes (D) into the ground.
4. Hook the clips from ends of ropes (C) to the loops on the
inflatable (A).
1
2
B
3
4
C
Lowes.com
5
A
D