Millenium Ultimate lock 3200 Series Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

The Ultimate Lock 3200 Series Installation Guide

Hi, I'm Driller, the Install gorilla.

Lock®, the finest deadbolt lock on the market. The Ultimate Lock® is engineered to be

a premium deadbolt locking system with multiple applications. I'm here to make your in-

stallation go as slick as a banana peel. I must be hungry! Just follow me and these

step-by-step instructions. We will install The Ultimate Lock® 3200 Series together

and make your home safer.

provide the maximum protection possible.

before you begin the installation

your lock at the customer support site below. From here you can submit a ticket to

report questions or problems you may have.

Before we get started, please read the entire instructions.

a. This lock is designed for a right- or left-handed door that swings opens into the home or office. The ex-

isting deadbolt should be installed at a 2-3/8" backset (Standard residential backset) (centered from the

edge of the door). b. To provide maximum protection, The Ultimate Lock

3/4" thick wood door or on a steel-skinned, insulation, or foam filled door mounted in a double studded door

frame. c. If your door does not already have a deadbolt installed, we highly recommended that you pur-

chase an installation jig kit for deadbolts and door handles. These kits include special hole saws, templates,

and other aids to simplify the installation process. If your door has a metal skin, be sure your kit includes Bi-

Metal hole saws to cut the steel door. Note: If your door jamb/frame is steel, do not remove the hinge

screws! See step 2. Please call customer service for more information before starting an install involving a

steel frame door.

1. Identify Your Parts

Driller Tip: Look for the lock bolt and

the deadbolt face plate #9 screws in the

second parts package.

Screws:

Tools You Will Need:

Drill, pencil, pliers, chisel, drill bits, 5/4" Spade bit, screw bits, speed square,

All Rights Reserves

Congratulations on purchasing The Ultimate

It is vital that your lock is installed properly to

Remember after we finish, go online and register

Exploded View

Page 1 of 8

Read these instructions completely

http://www.theultimatelock.org/

should be installed on a solid 1-

Figure 1

Table of Contents

Need help?

Do you have a question about the Ultimate lock 3200 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Millenium Ultimate lock 3200 Series

Page 1 The Ultimate Lock 3200 Series Installation Guide Hi, I’m Driller, the Install gorilla. Congratulations on purchasing The Ultimate Lock®, the finest deadbolt lock on the market. The Ultimate Lock® is engineered to be a premium deadbolt locking system with multiple applications. I’m here to make your in- stallation go as slick as a banana peel.
Page 2 2. Reinforce Your Hinges Figure 2 a. Unlike any other deadbolt lock, The Ultimate Lock includes screws to reinforce the hinges ® of your door to provide maximum protection from forced entry (screws in bag A). Your Ultimate Lock® comes with six (6) special long #8 screws that go through the jamb and secure the hinges to the studs of the door frame.
Page 3 4. Install Deadbolt Note: The Ultimate® Lock is NOT recommended Looking At The Door From The Inside! for outward swinging doors. Face Plate Figure 4b Figure 4a The deadbolt will be upside down in this application. a. Look at your door from the inside of the house, or room, and note if the hinges are on the right or left side of the door.
Page 4 5a. Install Key Lock NOTE: Check to see if the lock opens and closes with the deadbolt. If it does proceed to the next step. If it doesn't then the tailpiece needs to be rotated to the right, in the horizontal position and installed through the deadbolt (open position) into the main locking body in the open position, not the locked position.
Page 5 7. Final Lock Assembly Figure 7 a. Install decorative cover and secure with two case screws (found in Bag E) using No. 1 Phillips screwdriver. Tighten 90 percent of the first screw, then 90 percent of the second. Then the final 10 DO NOT OVER TIGHTEN! percent on each screw.
Page 6 8-b. Install Striker Plate d. Holding the striker plate in position, mark the position of the two recessed holes in the striker plate (Figure 8a) in the mortise of the door frame. Using the 3/4" spade drill bit, start a hole 1/8"...
Page 7 10. Operations The Ultimate Lock ® utilizes a deadbolt and security bar that work in unison—a mortise deadbolt and a rim deadbolt. The secondary rim deadbolt protrudes slightly across the door frame and makes it very easy to verify that your door is locked. To lock your door, simply turn the twist knob counterclockwise 90°...
Page 8 13. Limited Warranty ® Every Ultimate Lock is thoroughly inspected before leaving the factory. It is warranted to be free of manu- facturers defects for a period of TEN YEARS from the date of original purchase. Should any concerns de- velop during the TEN YEAR period, please all our office 866-MLS-4005...