Threaded fasteners not
8
tightened to the specified
torque can work loose or their
98
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
z
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 3 and
tighten to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamping
screw 2 to the specified tight-
ening torque.
Clamping bolt in wheel
carrier
19 Nm
Remove the front-wheel stand.
without centre stand generation
II
OA
Remove the rear-wheel stand
with BMW Motorrad Integral
OE
ABS generation II
Insert the ABS sensor into its
bore and install screw 1.
Ease the brake calipers on to
the brake discs.