Summary of Contents for Bavis MSR
- Page 1 201 Grandin Road Maineville, Ohio 45039 (513) 677-0500 Straight MSR Stand Manual Copyright 2015 E. F. Bavis & Associates, Inc. Revised: 05/11/2015 All Right Reserved PN: 00900279...
-
Page 3: Table Of Contents
MSR Stand Manual Table of Contents Parts List ..........................1 System Overview .........................1 Straight MSR Stand Installation ..................2 Straight Assembly Illustration .....................4 Suggested Bollard Placement ....................5... -
Page 5: Parts List
The MSR and audio/video cables, as well as the lanes control cables are run through the unit inside of the systems tubing. These MSR and audio/video cables can exit the tubing by either through a hole in the side of the tubing above ceiling or through a pull box mounted in the wall behind the inside vertical’s wall standoff. -
Page 6: Straight Msr Stand Installation
(It is recommended to leave gaps in the bead of caulk at the corners to allow for drainage.) 12. Connect the MSR power supply cable that is coming out of the top of the customer to the MSR Power Supply Box as instructed in the MSR installation manual. - Page 7 13. Connect the remaining cables of the MSR/Video Stand to their respective cables of the TransTRAX customer vertical, and re-install the customer tube’s cover plate and any other covers or plugs. 14. Install the MSR head and the video head as per their installation manuals.
-
Page 8: Straight Assembly Illustration
Straight MSR Installation Illustration MSR Head Video Head (Shipped separately) (Shipped separately) -
Page 9: Suggested Bollard Placement
Suggested Bollard placement only, actual placement is at the discretion of others. 12"...