Advertisement
5. MAINTENANCE
5.1.
Regularly check the truck chassis and front wheels for rigidity. Ensure that the rear castor is firmly secured to the chassis.
5.2.
Regularly check the clamp tooth for wear. Replace when necessary.
5.3.
Regularly check the truck's connecting components such as retaining pins, nuts and washers for lubrication and/or wear.
5.4.
If the performance of the unit degrades, it may be necessary to top up the oil (see lubrication point fig.3.2) If performance is not
improved, it may be necessary to bleed the system (see bleed point at fig.3.1).
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the
fluids according to local regulation
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Environmental Protection
s.
Advertisement
