Subscribe to Our Youtube Channel
Summary of Contents for Flybox PR1-PL
- Page 1 PR1-PL External lever for PR1-P Installation and operating manual Revision# 1.1 11/5/2016...
- Page 2 INDEX 1 - Important notices and warnings 2 - Installation 2.1 - Dimensions 2.2 - Wiring installation 3 - Panel indicators and commands 4 - Lever hardness adjustment 5 - Technical specifications 6 - Warranty 1. Important notices and warnings - Read entirely this manual before installing the instrument in your aircraft, and follow the installation and operating instructions described here.
- Page 3 - Use the template included at the bottom of this manual to hole the panel's aircraft. - If your aircraft's panel thickness is 2mm or less you can use the screw furnished with the PR1-PL otherwise use M3 screw with adequate length; remember to not enter with the screw thread more than 6mm inside the PR1-PL: 2.1 Dimensions...
- Page 4 3. Panel indicators and commands Control lever Plug for lever hardness adjustment NOTE: Before using the lever it's required to calibrate it. Refer to chap.5 (Using an external potentiometer or the Flybox® lever Mod. PR1PL) of PR1-P manual for the calibration procedure.
- Page 5 WARNING: All photos, data, drawings, instruments layouts, technical solutions and data representation you find in this document or watching at Flybox® instruments working and/or you can access by means of any other media, including web sites, are sole property of MICROEL SRL, cannot be copied or imitate without a written permission of MICROEL SRL itself and are protected by law, even by means of extended international copyright and/or specific patents deposited.
Need help?
Do you have a question about the PR1-PL and is the answer not in the manual?
Questions and answers