Table of Contents
Advertisement
MAINTENANCE
Turn tractor engine off before performing any maintenance.
Always use personal protection devices such as eye and ear protectors when
performing maintenance functions.
When completing a maintenance or service function, make sure all safety
shields are installed before placing mower in service.
BLADE SERVICING
Be sure safety locks are in place when working on decks in the raised
position. The tractor hydraulic system could fail, causing decks to fall and
crush anything under them.
Do not handle mower blades with bare hands. Careless or improper handling
may result in serious injury.
Inspect blades before each use to determine that they are mounted tightly and
are in good condition. Replace any blade that is bent, excessively nicked,
worn or has any other damage.
sharpening.
Only original equipment blades should be used when replacing worn out
mower blades. They are made of special steel alloys and subjected to rigid
heat-treat and inspection requirements. Substitute blades may not meet these
rigid specifications and MAY BE DANGEROUS.
Small nicks can be ground out when
28
Advertisement
Chapters
Table of Contents
