Table of Contents
Advertisement
Quick Links
Operating Instructions
Pneumatic Impact Wrenches
"Torque-Limited"
WARNING
In order to reduce the risk of injury, the operating instructions and safety
regulations must have been read and understood!
Never use torque-limited impact wrenches
without a torque wrench!
SL185-4TiD
Please refer to the vehicle manufacturer's op-
erating instructions, and apply the tightening
torques specified there!
SL150-4PD
SL175-4TD
Please read the operating instructions in full and for your own safety follow all of the instructions
contained therein.
Store the manual in a secure location.
Attention!
Remember that in accordance with the safety provisions of the Machinery Directive, a compressed air connec-
tion must not be made directly to the air inlet of the compressed air machine. Plug-in sleeves with pressed ends,
screwed into the air inlet of the device provide the greatest level of safety.
© Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen
Advertisement
Table of Contents
Summary of Contents for AirApp SL185-4TiD
- Page 1 Plug-in sleeves with pressed ends, screwed into the air inlet of the device provide the greatest level of safety. © Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen...
- Page 2 If the air flow pressure is below 6.2 bar, the tightening or releasing torque will also be reduced. Worn sockets and socket adapters will reduce the tightening and releasing torques. Tightening and releasing torques vary with different screw/nut sizes. © Copyright – AirApp Power Tools GmbH • Siemensstr. 9 – 11 • 40885 Ratingen...
- Page 3 Since the measured values of the actual exposure on site are beyond are control, AirApp Power Tools GmbH accepts no liability for the consequences of any health risk.
Need help?
Do you have a question about the SL185-4TiD and is the answer not in the manual?
Questions and answers