Flying Industry Development S1XB-DC06 Quick Manual

RF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
12 x Receiver: S1XB-DC06 / S1XB-DC09 / S1XB-DC12 / S1XB-DC24 (1 Channel / Three Control Modes)
1 x Transmitter: CV-12
1 x User manual
Feature:
Wireless control, easy to install
Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1XB-DC06 / S1XB-DC09 / S1XB-DC12 / S1XB-DC24
Channel: 1 CH
Control Modes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1XB-DC06), DC12V±1V (S1XB-DC12), DC9V±1V (S1XB-DC09), DC24V±1V (S1XB-DC24)
Output: DC6V (S1XB-DC06), DC12V (S1XB-DC12), DC9V (S1XB-DC09), DC24V (S1XB-DC24)
PCB Size: 67mm x 50mm x 18mm
Case Size: 75mm x 54mm x 27mm
Static Current: ≤6mA
Maximum Working Current: 10A
Transmitter:
Model No.: CV-6
Channel: 6 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by Soldering
Unit size: 110mm x 50mm x 18mm
Power Supply: 1 x 23A -12V battery (Included, can be used for 12 months)
Usage:
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following):
1) Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press button 1 again: Turn off the relay, terminal A&B of receiver 1 no output.
...
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press button 12 again: Turn off the relay, terminal A&B of receiver 12 no output.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Release button 1: Turn off the relay, terminal A&B of receiver 1 no output.
...
Press and hold button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Release button 12: Turn off the relay, terminal A&B of receiver 12 no output.
3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 1 no output.
...
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 12 no output.
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of remote
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com